AOH :: 25128A.TXT

Maxtor 25128A IDE Hard Disk Docs and Specs



===============================================================================
                           MAXTOR 25128A IDE DRIVE
===============================================================================

KEY FEATURES:
  * 15ms average seek                             * 32K on-board cache  
  * Ultra-low power consumption                   * >250,000 hour MTBF
  * 1:1 interleave                                * Automatic actuator lock 
  * Single-sided surface mount PCBA               * 100 Gs shock resistance
  * Embedded AT controller                        * High data transfer rate
  * Automatic error detection & correction

SPECIFICATIONS:
Formatted: ................................. 128,235,520 bytes
Embedded Controller: ....................... AT 
Actuator type: ............................. Rotary Voice Coil
Number of Disks: ........................... 2
Data Surfaces: ............................. 4
Data Heads: ................................ 4
Servo: ..................................... Embedded
Tracks per surface: ........................ 1,092
Track Density (average): ................... 2,550 tpi
Bytes per Block: ........................... 512
Data Zones: ................................ 4
Sectors per track: ......................... 30-60

PERFORMANCE (Typical):

Seek times* (ms)
     Track to track: ....................... 3
     Average: .............................. 15 
     Maximum: .............................. 27

Average latency (ms) ....................... 8.4
Rotation speed ............................. 3,551 RPM
Controller overhead ........................ 1 ms

Data transfer rate (Mbytes per sec)
     To/from media ......................... 1.19-2.29
     To/from buffer (AT) ................... 8.0

Start time / power up (0-3,551 RPM)
     Typical ............................... ó5 sec

Stop time / power down
     Typical ............................... ó3 sec
Start/stop cycles .......................... 40,000 typical
Interleave: ................................ 1:1
Buffer Size: ............................... 32K
Interface: ................................. AT 
Recording Method: .......................... 1,7 RLL
Recording Density (Kbpi) ................... 39-46
Flux Density (Kfci) ........................ 29-34

Power Requirements (Typical):

    Mode             +5VDC ñ5%        Power
    Spin-up           970mA Avg Peak
    R/W               440mA            2.2W
    Idle              220mA            1.1W
    Standby / Sleep    40mA            0.2W

Physical:

    Height:  0.69" (17.5 mm)
    Length:  4.00" (101.6 mm)
    Width:   2.75" (69.84 mm)
    Weight:  0.374 lbs.(170 gm)

Environmental:

Temperature 
    Operating .............................. 5øC to 55øC
    Non-operating .......................... -40øC to 60øC
    Thermal gradient ....................... 20øC per hour max

Humidity
    Operating .............................. 5% to 90% non-condensing
    Non-operating .......................... 5% to 90% non-condensing

Altitude (relative to sea level)
    Operating .............................. -200 to 10,000 feet
    Non-operating .......................... 40,000 feet max
    
Reliability and Maintenance:

MTBF ....................................... >250,000 hours 
                                             (POH, predicted at 35 degrees C)
Preventative Maintenance ................... None
Component design life ...................... 5 years (minimum)
Data reliability
     Hard read errors ...................... <10 non-recoverable 
                                              per 10 to the 14th bits read
Shock & Vibration (typical)
          Shock measured at half-sine pulse. Vibration 
          measured at swept sine, 1 octave per minute
    Operating shock ........................ 100 Gs, 11ms 1/2 sine wave
    Non-operating shock .................... 10 Gs, 11ms  1/2 sine wave 
    Non-operating Vibration 
     5-20 Hz ............................... .245" (double amplitude)
     20 - 500 Hz ........................... 5 Gs peak amplitude
    Operating Vibration
     5-20 Hz ............................... .049" (double amplitude)
     20 - 300 Hz ........................... 1 Gs peak amplitude
Acoustic Noise
    34 dBA at 1 meter (typical) in idle (spinning) on-track mode.

  *  The average of 10,000 random seek times (measured on independent
     test equipment) constitutes the average seek time specification.
========================================================================

         ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÂÄÄÄÄÄÄÄÄÄÄÄÄ¿
         ³              ÀÄÙ                     ÀÄÙ        ÍÎÍͳ
         ³                                                 ÍÎÍͳ
         ³                ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»                 ÍÎÍͳ
         ³                º  ÚÄÄÄÄÄ¿     º                 ÍÎÍͳ
         ³                º  ³ 0 0 ³J304 º    ÚÄÄÄ¿        ÍÎÍͳ
         ³                º  ³ 0 0 ³J305 º    ³   ³         ÌÍͳ
         ³                º  ³ 0 0 ³J306 º    ÀÄÄÄÙ        ÍÎÍͳ
         ³                º  ³ ÛÛÛ ³J308 º      ÚÄÄ¿       ÍÎÍͳ
         ³                º  ³ 0 0 ³J309 º      ³::³       ÍÎÍͳ
         ³                º  ³ 0 0 ³J307 ÇÄÄÄÄÄ>³;;³       ÍÎÍͳ
         ³                º  ÀÄÄÄÄÄÙ     º      ³::³        º  ³
         ³                ÈÍÍÍÍÍÍÍÍÍÍÍÍÍͼ      ÀÄÄÙ       ÍÎÍͳ
         ³              ÚÄ¿                     ÚÄ¿        ÍÎÍͳ
         ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÁÄÄÄÄÄÄÄÄÄÄÄÄÙ

                                           J306 J307 J308 J309
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÂÄÄÄÄÂÄÄÄÄÂÄÄÄÄ¿
     Master/Slave                          ³    ³    ³    ³    ³
        Only Drive in single drive system* ³    ³    ³ J  ³    ³
        Master in dual drive system        ³    ³    ³ J  ³    ³
        Slave in dual drive system         ³    ³    ³ O  ³    ³
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÅÄÄÄÄÅÄÄÄÄ´
     Reserved for factory                  ³    ³    ³    ³    ³
       Normal operation*                   ³    ³ O  ³    ³ O  ³
       Factory operation                   ³    ³ J  ³    ³ J  ³
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÅÄÄÄÄÅÄÄÄÄÅÄÄÄÄ´
     Idle Mode Latch                       ³    ³    ³    ³    ³
      Option Disabled*                     ³ O  ³    ³    ³    ³
      Option Enabled                       ³ J  ³    ³    ³    ³
   ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÁÄÄÄÄÁÄÄÄÄÁÄÄÄÄÙ
    *=Default J=Jumped O=Open
    J304 & J305 reserved for future use

     CMOS Configuration:     Cyls  Hds  Write  Landing Sec/Trk
                                       PreComp  Zone
     122.3MB Capacity        ---------------------------------
     (128 Million Bytes)      981   10     0       0       17


           2585A and 25128A are trademarks of Maxtor Corporation.
              AT is a registered trademark of IBM Corporation.
              Specifications subject to change without notice.
                     Copyright 1992 Maxtor Corporation.
==============================================================================
^Z



Make REAL money with your website!

The entire AOH site is optimized to look best in Firefox® 2.0 on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2008 AOH
We do not send spam. If you have received spam bearing an artofhacking.com email address, please forward it with full headers to abuse@artofhacking.com.