AOH :: REPLY2.TXT|
The TVQ Group reveals details about their forthcoming book "Practical Scalar Engineering"
(word processor parameters LM=8, RM=75, TM=2, BM=2)
Taken from KeelyNet BBS (214) 324-3501
Sponsored by Vangard Sciences
PO BOX 1031
Mesquite, TX 75150
There are ABSOLUTELY NO RESTRICTIONS
on duplicating, publishing or distributing the
files on KeelyNet except where noted!
June 11, 1993
This file shared with KeelyNet courtesy of Joseph Misiolek.
A greeting to the KeelyNetters from the TVQ group :
We are delighted with the response to REPLY.TXT, and we feel we owe
a debt to the KeelyNetters for our occasional "stalking" in the
past. It is time to pay up and put up.
Who are we, what are we doing here?
Our group exists only as a set of overlapping personal relationships
between individuals. There are no rules as such, no membership list
or requirements, just common goals and dedication to a rational
approach. Not pseudoscience. We cooperate on the basis of mutual
respect for the dedication needed to pursue any "fringe" area and
maintain the standards of good science. We have had projects
funded, and make no restrictions on members obtaining outside fund-
ing, or using their new skills for hire.
Most of our members are professionals in technical and business
positions, and therefore wish to remain discreetly anonymous, so
that we can afford to pursue our common interests. This is the
cause of much of the "stalking".
As a group, we were fortunate to have been in the right place at the
right time. Our inception was in the greater Boston area, which
provided us with an abundance of surplus equipment as well as access
to some cutting edge technologies and a vast array of professional
skills. We now make these resources available to new members in
other areas. Access to Internet, the Tesla BBS and now KeelyNet
have allowed us to find new members and make our skills and
experience available to others.
We possess equipment ranging from aircraft to xenon gas (I suppose
we've got some zinc somewhere), and several well stocked labs
located in industrial space as well as in individuals homes. We are
comparatively understaffed, and the equipment largely underutilized.
For this reason, as well as good karma, we are reaching out to get
We welcome new members, and our book is intended to be a recruiting
tool as well as a catalyst. If the initial reaction of the
KeelyNeters is any indication, we are sure we will succeed.
When will it be published?
The length of time is probably inversely related to the amount of
grief we receive, if we found ourselves surrounded by an angry mob
armed with pitchforks and torches we would get right on it. If
anyone has any devices or results that should be included, let us
Here is the tentative outline for the book.
Chapter 1 - Introduction, a short and hopefully painless monologue
stating the party line.
Chapter 2 - Detector design theory, how they work, how to design new
Chapter 3 - Practical detectors, construction projects for several
scalar detectors and spectrum analyzers, including a
bidirectional scalar transceiver.
Chapter 4 - Translator design theory, what works, what doesn't, and
Chapter 5 - Practical translators, construction projects for several
Chapter 6 - Scalar systems theory, open vs. closed systems, balanced
Chapter 7 - Construction tips and test equipment.
Chapter 8 - Test data and data logging, will include test data on
all devices presented.
Chapter 9 - Definition of terms.
Chapter 10 - References and recommended reading lists.
We understand that by discussing the virtual particle collider
design on KeelyNet, the loud mouthed "chief designer" will probably
have to include a chapter on power generation systems theory. This
will be another delay.
Some thoughts from "The Chief Designer".
I must apologize to my readers for the use of terms such as
"Translation Matrix" in the REPLY.TXT file uploaded to KeelyNet.
I believe that it is the responsibility of the speaker to be clearly
understood. I will attempt to eliminate any confusion that has been
caused here, before the publication of Practical Scalar Engineering
The term Translation Matrix is a generic term which refers to the
matter or spacetime in which the translation from virtual particle
flux to photon flux occurs. This is the translation from "current
free potential" to "free energy". This process (Exophoton emission
as an example) may be performed in free space (vacuum) by the
process of field interference. More commonly, it is performed
within matter. In Mr. Bearden's example this is done within the
degenerate semiconductor material. The design we presented uses a
series of gas filled tubes prepared in the manner described in our
letter to Mr. Bearden.
So in summary, the translation matrix is the area or material in
which the translation process is performed.
For further clarification, in the system we describe in our paper,
it all goes like this : A source of charge, we care not what,
charges the virtual particle flux collector. This provides Mr.
Bearden's "Current free potential", which is switched onto the
translation matrix and exciting the atoms. The switch now opens,
the electrons all fall down and radiate electromagnetic radiation.
This is delivered to the load, bills go away, bill collectors get
The confusion caused by such a generic term is exactly what I had
wished to avoid, and the reason the I resorted to describing the
details of a practical system. I will endeavor to avoid this in the
future. I would like to thank Mark Mansfield for calling me on this
In an electrostatically balanced configuration, the energy system we
have described is actually a Virtual Particle-Antiparticle Collider,
so don't try this at home unless you are very sure you know exactly
what you are doing. Gamma rays are nasty.
Unbalanced configuration should not be run in excess of 100 watts
delivered power, and even then only for short duration demonstration
or testing use.
Avoid the area during and shortly after the operation of any
unbalanced system. If you can possibly avoid it, don't do it at
all. Note that if a resistive load is run by this unbalanced
device, it will still run hot, because we have done a good job of
translation. At low power levels any time reversed effects are too
small to measure. Most of the existing "free energy" designs can be
redesigned for correct operation in this way.
If the "time reversed" effect is what you need, don't do it in an
An energy generation system such as we have discussed so far is open
to the quantum vacuum. It would be foolish to attempt anything
other than getting the energy we need in an open system. The
construction of closed versus open systems will be explained in the
Jerry Decker has asked if our group has an official definition of
terms. Indeed we do, and it will be included in volume 1 of
Practical Scalar Engineering. I am including a sample of those
definitions which relate to the system described in our letter to
In fact we have a hypertext information tree system running on a
network of engineering workstations which contains most of our
designs, lab notes, theoretical papers etc. These workstations are
located in various locations throughout one of our installations so
that each work center or bench has access to the database. These
workstations (made by Apollo Computer) run an unfortunately obscure
windowing, multitasking, and networking operating system (Aegis).
This makes exporting data to the DOS or Mac worlds time consuming.
This work is already underway, as Practical Scalar Engineering is
comprised of excerpts from that database, and must be my first
These workstations are available surplus for the price of a PC, and
feature an ISA bus for experiment automation and data collection.
They are based on the 68020 and 68030 processors for you computer
types. If any new members are interested, the Aegis Hypertext
version of the database could be made available in the future,
complete with the workstation, of course.
It has been brought to my attention that the article on the "Cyber
Probe" has been uploaded onto KeelyNet. Although some of the
applications of the device presented may have no place in a
technical discussion, its operating principals may. The basic
design of the device can be improved to produce a device which
responds only to the scalar electrostatic potential gradients. Such
a device has been constructed, and includes a reference meter which
indicates the vector energy density as well as the magnitude and
polarity of the electrostatic gradient.
We would like to have our device compared to the original devices by
persons already familiar with such devices. Perhaps in the hands of
an "adept" individual with a bit of "cross training" this device and
others like it can add credibility to the investigation of all
manner of phenomena. Any KeelyNeters out there on ParaNet? I just
design and build 'em, this other stuff is someone else's job.
Definitions of some terms used in the original TVQ paper :
Scalar electromagnetics is an as yet incomplete unified field
theory which studies the behavior of vector sum zero
Natural Scalar Potentials.
Scalar potentials which have a non-deterministic (random)
substructure. For example, white noise. Artificial Scalar
potentials have deterministic substructures. The quantum vacuum
is a natural scalar potential.
The concept of the quantum vacuum is taken from modern quantum
mechanics theory, and is what we scalar researchers use to scare
the hell out of "classical" physicists. Good definitions exist
Stress on spacetime. The intensity of the natural scalar
potential of the quantum vacuum, or any ordering of the virtual
particle flux of the quantum vacuum. Order in and of itself it
not implied, as in a natural scalar potential.
Exophoton emission is the process by which a photon (or
electron) is liberated from the Dirac sea. This process is
taken from standard quantum mechanics, and is described in
See exophoton emission.
Translators are scalar electromagnetic components which either
take electromagnetic waves and phase cancel them (sum to zero)
producing scalar waves, or conversely transform scalar waves
into electromagnetic waves, or both.
The translation matrix is that part of a translating system in
which the translation process occurs. It may be the space
surrounding a coil, or between the plates of a capacitor, or it
may be the matter comprising the translator itself.
The translation process is the mechanism by which a potential is
converted from scalar to vector (electromagnetic) or the
reverse. We currently have documented the following eight
translation processes, but there is debate as to whether or not
they are unique :
1) Translation by sum zero high ration transformation -
2) Translation by radiated wave interference. - Scalar beam
3) Translation by standing wave interference. - Scalar field
4) Translation by net non-inductors. - No E or B fields
5) Translation by plasma / Lamb shift. - Exophoton emission as
in our example.
6) Translation by non-linear junctions - Such as
7) Translation by magnetic modulation - As in the Dea-Faretto
8) Translation by inert gases. - This one takes some
explaining, but is has to do with the generation of
powerful natural scalar potentials.
Each of these processes will be described in detail in the book, and
practical examples will be given.
Virtual particles are the "messengers" of quantum physics, and
are responsible for all fields. Virtual particles are standard
quantum physics, and are described in textbooks on the subject.
Virtual particles are identical to normal particles, but are
Virtual Particle flux.
See quantum vacuum.
Virtual Particle Flux Collector.
The virtual particle flux collector is a component of scalar
electro-magnetic systems which converts an electrostatic charge
into pure virtual particle flux.
I hope this clears up any confusion I have created. Now a few words
from some of our other members.
Thoughts from "HAL":
As the instigator, of sorts, of the TVQ group, I primarily function
in the corporate environment, creating corporations and the like,
and putting people and ideas together to see where it will lead. I
have always had an avid passion for research into lost or
alternative technologies. My goal is getting to the truth and
presenting these concepts to the people who can put them to
practical use, and making things happen.
In approximately 1985 I presented several papers to some engineers
for evaluation. They were skeptical, but willing to "look it over".
Their skepticism waned rapidly as devices were constructed, tested
and effects proven to exist that needed further study.
Our "Chief Designer" was a particularly rewarding challenge because
he was skeptical for a very long time. It has become evident to the
TVQ Group that the time has come to share our many years of research
in the hope of unifying all of our efforts. If we are ever to
realize freedom we will have to get this information out to and
understood by the mainstream not the fringe minority. We should
compile a master database of all experimental results, available to
all researchers. At the present time we have enough computing
capability that we can serve as a master electronic library.
Some thoughts from our "Tesla Technologist":
The skills that I bring to the TVQ group are somewhat diverse in
nature. Here are a few of my "Hobbies": Programming, electronics,
chemistry, physics, ancient civilizations, music and the occult. I
am therefore best described as the "Jack of all Trades" of TVQ
My primary interests are in generating extreme amounts of energy
(both continuous and pulsed) for such applications as potent
directed energy beams, high-density energy fields (for use as
shields), gravitational control and modification, teleportation and
time engineering. I have been pursuing this technology since 1978.
My first contact with TVQ group came in 1989 on the Tesla BBS (Toby
Grotz) in Colorado. I was working with non-vector EM energy pulses
and needed a reliable set of detectors for field mapping and
intensity measuring. Since my initial contact with TVQ, I have
constructed four different detector types (three TVQ designs and one
of my own inventions based on opto-isolator integrated circuits.)
All four devices were quite successful.
Since then, I have worked with others at TVQ on some of Bearden's
concepts and on the Virtual Particle/Anti-Particle Collider system.
It is my sincere hope that the book that we are preparing and the
devices that are being designed will usher in a new era of technolgy
for mankind. I firmly believe that the proper use of these
engineering principles will provide the means to accomplish the
lofty goals that I have outlined above.
I believe that other researchers working in these areas need to come
forward now and lay their cards down on the table with us. This
technology is too important to let it "fade away" as it has tended
to do in the past (along with its' researchers.)
All the best wishes,
If you have comments or other information relating to such topics
as this paper covers, please upload to KeelyNet or send to the
Vangard Sciences address as listed on the first page.
Thank you for your consideration, interest and support.
Jerry W. Decker.........Ron Barker...........Chuck Henderson
If we can be of service, you may contact
Jerry at (214) 324-8741 or Ron at (214) 242-9346
The entire AOH site is optimized to look best in Firefox® 3 on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986- AOH
We do not send spam. If you have received spam bearing an artofhacking.com email address, please forward it with full headers to firstname.lastname@example.org.