Russian Caller ID specifications (in Russian language):
Really, we do not have Caller ID here. There is ANI (Automatic Number
Identification) instead. It is not a service - it's a bug in telephone
exchange hardware. There are several versions of Russian ANI history. First
one (official) is that it was developed for telephone operators to make it
easier to charge for long-distance calls. Second one (unofficial) says that
there was no need for such a service for that purpose (there was another
method to determine calling party, using exchange electrical protocols),
and ANI was developed for KGB (it was a Soviet analog of U.S. CIA; "KGB" =
"Committee of State Security" or like that). It sounds realistic.
Anyway,the "service" was never aimed to be public... and some newer
exchanges do not provide this feature. So some numbers can be detected here
while some can not be. It's all Russia...
Below is a part of Advanced Call Center documentation:
Russian Caller ID (RCID), available in Russia and some European countries.
Detecting RCID is much more complicated, because most of existing modems do
not provide hardware support for RCID.
RCID signal is being sent after modem takes the call. So we have the
1 - take the call (ANSWER)
2 - 200-250 milliseconds delay before requesting RCID
3 - RCID request (100-200 milliseconds, 500Hz tone)
4 - receive and decode RCID packet, if any
5 - if error, goto 2 (up to 3 requests)
6 - emulate 'ring back' tones to the line, so that caller won't know we already took the call
There are some problems. First, modem hardware is rather slow, and delay
between answering and sending request tone can exceed the time ATE will
wait for RCID request. In this case it is recommended to set up TWO request
tones in the 'Caller ID Detection' section of 'Properties' dialog.
Then, some ATEs send RCID packet without request. This means that when we
send RCID request, some time will pass and part of the signal will already
be transmitted. Solution is to set 'Pre-detect time' parameter in the
'Caller ID Detection' section of 'Properties' dialog to non-zero value
(numbers around 100-200 milliseconds suspected). It is recommended to set
100 ms when using TWO request tones and 200 ms when issuing only ONE
request tone. Generally pre-detect time should be ZERO.
RCID reception and decoding is performed inside of the program, not the
modem hardware (if not using 'Hardware XXX' Caller ID type). This process
can be controlled from within 'Actions' section of 'Properties' dialog, but
generally there is no need to adjust this stage.
Number of 'ring back' tones emulated to line can be set from within
'Action' section of 'Properties' dialog. You can also change default action
that will be performed after going online and/or emulating N 'ring back'
signals to the line. You may choose from options like 'drop immediately' or
'after N 'ring back' tones'; or it can 'answer', 'set caller on hold' and
even switch on 'answering machine'.
Russian Caller ID consists of a packets like that:
1 - ID, calling category;
2 - 7-th digit
3 - 6-th digit
4 - 5-th digit
5 - 4-th digit
6 - 3-rd digit \
7 - 2-nd digit - phone station (exchange) index, 3 digits
8 - 1-st digit /
9 - begin/end mark,
10 - ID, calling category.
Packets are cyclic; an exchange can transmit 2 or 3 packets in cycle,
beginning from the middle of the packet. The number can be requested up to
3 times. Every digit in the packet consists of CCITT R1 standard, 2
frequencies (a kind of DTMF tone):
"Repeat last digit"
Or, which is just the same:
1 f0 f1 6 f2 f4 11 f0 f11
2 f0 f2 7 f0 f7 12 f1 f11
3 f1 f2 8 f1 f7 13 f2 f11
4 f0 f4 9 f2 f7 14 f4 f11
5 f1 f4 10 f4 f7 15 f7 f11
13 = "Begin/end mark"
14 = "Repeat last digit"
ID, or calling category, is one of that:
1 - Standard subscriber. Long-distance calls permitted.
2 - Hotel subscriber.Long-distance calls permitted with immediate payment.
3 - Subscriber for local service only.
4 - Priority subscriber.
5 - Toll-free phone. Calls are not paid but being registered.
6 - Long-distance pay-phone.
7 - Subscriber with additional service. Long-distance calls permitted.
8 - Priority subscriber with additional service.
9 - Local pay-phone.
0 or 10 - Reserved.
For example, my category is 1. Some of my friends with newer exchanges have
category = 7. Organisations usually have 3.
<B = begin/end mark (digit '13')
<R = repeat (digit '14')
221-45-47 (category 1)
Will be transmitted as:
Number: 1234556, category: 3
The entire AOH site is optimized to look best in Firefox® 3 on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2015 AOH
We do not send spam. If you have received spam bearing an artofhacking.com email address, please forward it with full headers to firstname.lastname@example.org.