AOH :: P02-04.TXT

How to make Blow Darts

				==Phrack Inc.==
		     Volume One, Issue Two, Phile #4 of 9

			 !  How To Make Blow Darts  !
			 !			    !
			 !    Written by The Pyro   !
			 !			    !
			 !			    !

  Blow darts are easy to make and all the materials can be found in your own
 home.	These darts can travel a long distance with good penetration if
 constructed correctly.

  Materials needed:

 A small piece of wood
 A sewing machine needle
 A spool of thread
 A couple nails

  Hammer the two nails about two inches apart on the board.  Wrap the thread
 tightly around the two nails.	The number of times the thread is wrapped
 around the nails will determine the amount of weight and stability the dart
 has.  Once you have decided you have wrapped enough thread, cut it close to
 the nail at around a half inch.  Take this small tuft of thread and put a dab
 of glue on the folded end.  The kind of glue you use is very important.  I
 suggest that you use a tacky kind of glue (nothing runny, like Elmer's glue).
 Attach this to the needle and hold until it is dry.

  Another kind of dart can be made with Q-tips.  This kind of dart doesn't
 work as well as the first one, but it is sometimes easier to make.  first you
 have to get the kind of Q-tips that have a plastic stem.  Cut the Q-tip close
 to one end.  Insert the sewing needle into the Q-tip and secure it by melting
 the plastic slightly with a lighter.  This kind of dart doesn't last long
 because the cotton come off easily.

  Blow Guns:

  Ordinary straws make an excellent blow gun with this kind of dart.  Another
 kind can be made with a cheap pen by taking apart the pen and using the
 shell.  Any long, cylindrical, object with the diameter of a straw will work
 very well.

	T h e  A l l i a n c e


	     7pm. to 7am.

AOH Site layout & design copyright © 2006 AOH