CONNECTIONS
40-pin IDE Interface (AT) connector	CN1
34-pin data cable connector-floppy drives	CN2
4-pin connector-drive active LED	CN3
5-pin connector-DC power	CN4

USER CONFIGURABLE JUMPERS
Function		Location	Setting
»	Floppy drive port address is 3F0-3F7h	JP1	pins 1 & 2 closed
	Floppy drive port address is 370-377h	JP1	pins 2 & 3 closed
»	Hard drive port address is 1F0-1F7h	JP2	pins 1 & 2 closed
	Hard drive port address is 170-177h	JP2	pins 2 & 3 closed
»	Hard drive enabled	JP3	pins 2 & 3 closed
	Hard drive disabled	JP3	pins 1 & 2 closed
»	I/O Channel Ready output on Interface pin 27	JP4	pins 1 & 2 closed
	I/O Channel Ready output on Interface pin 21	JP4	pins 2 & 3 closed
»	IRQ14 connected to bus	JP5	pins 1 & 2 closed
	IRQ14 is buffered	JP5	pins 2 & 3 closed