...because we can't all be on the bleeding edge...





BUSMASTER FAST-SCSI DCB-EISA

ADVANCED DIGITAL INFORMATION CORPORATION

BUSMASTER FAST-SCSI DCB-EISA

Data bus:

32-bit, EISA

Size:

Full-length, full-height card

Hard drive supported:

Up to seven SCSI devices

Floppy drives supported:

Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB drives

CONNECTIONS

Function

Location

4-pin-connector - drive active LED

J1

34-pin control cable connector - floppy drive

J2

50-pin SCSI connector - internal

J3

50-pin SCSI connector - external

J4

USER CONFIGURABLE SETTINGS

Function

Location

Setting

Floppy drive enabled

W8

closed

 

Floppy drive disabled

W8

open

 

Floppy drive enabled

J3

pins 41 & 42 closed

 

Floppy drive disabled

J3

pins 41 & 42 open

 

Note (1):The floppy drive controller can be enabled any one of three ways:

(a) close jumper W8, or

(b) close pins 41 & 42 of connector J3, or

(c) select the floppy disk controller enabled option in the EISA configuration file.

Note (2):To disable the floppy disk controller, all three of the above options must be disabled:

(a) open jumper W8, and

(b) open pins 41 & 42 of connector J3, and

(c) select the floppy disk controller disabled option in the EISA configuration file.