Data bus: 16-bit, ISA
Size: Three-quarter length, full-height card
Hard drives supported: Up to seven SCSI devices
Floppy drives supported: Two 360KB, 720KB, 1.2 MB or 1.44 MB drives
|
USER CONFIGURABLE SETTINGS
|
|
Function
|
Location
|
Setting
|
| »
|
SCSI Parity check enabled
|
SW1/switch 4
|
on
|
| »
|
SCSI Parity check disabled
|
SW1/switch 4
|
off
|
| »
|
SCSI Auto Sense function enabled (for Rev. <=F)
|
SW1/switch 5
|
on
|
| »
|
SCSI Auto Sense function disabled (for Rev. <=F)
|
SW1/switch 5
|
off
|
| »
|
Disk >1G support disabled (for Rev. >=G)
|
SW1/switch 5
|
on
|
| »
|
Disk >1G support enabled (for Rev. >=G)
|
SW1/switch 5
|
off
|
| »
|
Synchronous transfer initiation from controller disabled
|
SW1/switch 6
|
on
|
| »
|
Synchronous transfer intitiation from controller enabled
|
SW1/switch 6
|
off
|
| »
|
Floppy drive port address 3F0-3F7h
|
W14
|
open
|
| »
|
Floppy drive port address 370-377h
|
W14
|
closed
|
| »
|
Floppy drive enabled
|
W15, W16
|
closed
|
| »
|
Floppy drive disabled
|
W15, W16
|
open
|
| »
|
I/O channel ready enabled
|
W17/pins 1 & 2
|
closed
|
| »
|
I/O channel ready disabled
|
W17/pins 2 & 3
|
closed
|
| »
|
Factory configured - do not alter
|
W18
|
N/A
|
| »
|
Factory configured - do not alter
|
W19
|
N/A
|