ADAPTEC, INC.
AHA1532P
|
Card Type |
Hard drive controller card |
|
Hard Drives supported |
Up to 7/15 SCSI devices |
|
Floppy drives supported |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
Data Bus |
16-bit ISA |
|
Card Size |
Half-length, full-height card |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
34-pin cable connector - floppy drive |
J1 |
50-pin SCSI connector - internal |
J3 |
|
4-pin connector - drive active LED |
J2 |
50-pin SCSI connector - external |
J4 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
| » |
Port address is 340h-35Fh |
SW4 |
Off |
|
Port address is 140h-15Fh |
SW4 |
On | |
| » |
Floppy drive interface enabled |
SW5 |
Off |
|
Floppy drive interface disabled |
SW5 |
On | |
|
BIOS ADDRESS SELECTION | |||
|
Address |
SW1/C |
SW1/D |
SW1/E |
|
C8000h |
On |
Off |
On |
|
CC000h |
On |
Off |
Off |
|
D0000h |
Off |
On |
On |
|
D4000h |
Off |
On |
Off |
|
D8000h |
Off |
Off |
On |
|
DC000h |
Off |
Off |
Off |
|
DC000h, inactive |
On |
On |
Off |
|
BIOS disable |
On |
On |
On |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
DS1 |
Green |
On |
Termination is set correctly |
|
DS1 |
Red |
On |
More than two devices are terminated |
|
DS1 |
Orange |
On |
Fewer than two devices are terminated |
|
Note: The LED only light up when the disk drive is active. | |||