...because we can't all be on the bleeding edge...
DTK COMPUTER, INC.
PTI-215
|
|
Data bus: 16-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two IDE (AT) Interface drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
|
CONNECTIONS | |
|
Function |
Location |
|
4-pin connector-drive active LED |
J1 |
|
40-pin AT Interface (IDE) connector-internal |
J2 |
|
34-pin data cable connector-floppy drive |
J3 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Hard drive enabled |
JP1 |
closed |
|
Hard drive disabled |
JP1 |
open | |
| » |
Normal operation |
JP2 |
pins 1 & 2 closed |
|
Supports old IDE drive types (ie: Conner CP-342) |
JP2 |
pins 2 & 3 closed | |
| » |
Single speed floppy drives |
JP3 |
pins 1 & 2 closed |
|
Dual speed floppy drives |
JP3 |
pins 2 & 3 closed | |
|
Precomp. value dependent on data rate as follows: 500Kb/sec = 125ns precomp. 125Kb/sec = 208ns precomp. 125Kb/sec = 250ns precomp. 1000Kb/sec = 83ns precomp. |
JP4 |
pins 1 & 2 closed | |
|
Precomp. value dependent on data rate as follows: 500Kb/sec = 125ns precomp. 300Kb/sec = 125ns precomp. 250Kb/sec = 125ns precomp. 1000Kb/sec = 83ns precomp. |
JP4 |
pins 2 & 3 closed | |