CONNECTIONS
Function	Location
34-pin control cable connector-hard drive	CN1
20-pin data cable connector-drive 0	CN2
20-pin data cable connector-drive 1	CN3
4-pin connector-drive active LED	CN4
5-pin connector-DC power	CN5

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy Drive Changed Signal not driven	JP1	open
	Floppy Drive Changed Signal driven low	JP1	closed
»	Hard drive port address 1F0-1F7 and 3F6-3F7h	JP2 and JP3	open
	Hard drive port address 170-177 and 376-377h	JP2 and JP3	closed
»	Drive Select "flip-flop" controlled by firmware	JP5	pins 2 & 3 closed
	Drive Select "flip-flop" controlled by system reset	JP5	pins 1 & 2 closed
»	Initial interrupt enabled after reset	JP4	pins 2 & 3 closed
	Initial interrupt disabled after reset	JP4	pins 1 & 2 closed
»	Normal operation mode	JP6	closed
	Internal use mode	JP6	open
»	Normal operation mode	JP7	closed
	Internal use mode	JP7	open
»	BIOS enabled	JP8	closed
	BIOS disabled	JP8	open
»	BIOS address is C800h	JP9	open
	BIOS address is D800h	JP9	closed