Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE(AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE(AT) Interface connector	J1
34-pin control cable connector-floppy drive	J2
2-pin connector-Drive active LED	JP2

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Direct IRQ14 control	JP1	Pins 1 & 2 closed
	Select SLAVE/ACTIVE control	JP1	Pins 2 & 3 closed
»	Floppy drive enabled	JP3	open
	Floppy drive disabled	JP3	closed
»	Hard drive (CS0) port address is 1F0-1F7h	JP4	Pins 2 & 3 closed
	Hard drive (CS0) port address is 170-177h	JP4	Pins 1 & 2 closed
	Hard drive disabled	JP4 & JP5	open
»	Hard drive (CS1) port address is 3F0-3F7h	JP5	Pins 2 & 3 closed
	Hard drive (CS1) port address is 370-377h	JP5	Pins 1 & 2 closed