Data bus:	32-bit, VL-bus
Size:	Three/quarter-length, full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE(AT) Interface connector	J1
34-pin control cable connector - floppy drive	J2
15-pin game port - internal	J3
10-pin serial port (COM1/2/4) - internal	J4
10-pin serial port (COM1/2/3) - external	J5
25-pin parallel port (LPT1/2/3) - external	J6
4-pin connector - Drive active LED	J7

SERIAL PORT CONFIGURATION JUMPERS JP1 - SERIAL PORT 1 (J5) : JP2 - SERIAL PORT 2 (J4)
»	Port is DTE (Data Terminal Equipment)	pins 1 & 2, 3 & 4, 5 & 6, 7 & 8, 9 & 10 closed
	Port is DCE (Data Comm. Equipment)	pins 1 & 3, 2 & 4, 5 & 7, 6 & 8, 9 & 10 closed

HARD DRIVE SPEED
Function		JP3/jumper 1	JP3/jumper 2
»	Slow (600ns)	pins 1 & 2 closed	pins 1 & 2 closed
	Medium (383ns)	pins 2 & 3 closed	pins 1 & 2 closed
	Fast (240ns)	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORT SIGNAL STATUS JP4 - SERIAL PORT 2 (J4) : JP5 - SERIAL PORT 1 (J5)
Function		Location	Setting
»	DCD (Data Carrier Detect) - NORMAL	Jumper 1	pins 1 & 2 closed
	DCD (Data Carrier Detect) - FORCED TRUE	Jumper 1	pins 2 & 3 closed
»	DSR (Data Set Ready) - NORMAL	Jumper 2	pins 1 & 2 closed
	DSR (Data Set Ready) - FORCED TRUE	Jumper 2	pins 2 & 3 closed
»	CTS (Clear To Send) - NORMAL	Jumper 3	pins 1 & 2 closed
	CTS (Clear To Send) - FORCED TRUE	Jumper 3	pins 2 & 3 closed

SERIAL PORTS 1 (J5) CONFIGURATION
Function		JP6/jumper 1	JP6/jumper 2
»	COM1	pins 1 & 2 closed	pins 1 & 2 closed
	COM2	pins 2 & 3 closed	pins 1 & 2 closed
	COM3	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORTS 2 (J4) CONFIGURATION
Function		JP6/jumper 3	JP6/jumper 4
»	COM2	pins 1 & 2 closed	pins 1 & 2 closed
	COM1	pins 2 & 3 closed	pins 1 & 2 closed
	COM4	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

PARALLEL PORT (J6) CONFIGURATION
LPT		JP6/jumper 5	JP5/jumper 6
	LPT1 (3BC-3BEh)	pins 1 & 2 closed	pins 2 & 3 closed
»	LPT2 (378-37Ah)	pins 2 & 3 closed	pins 1 & 2 closed
	LPT3 (278-27Ah)	pins 1 & 2 closed	pins 1 & 2 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive enabled	JP6/jumper 7	pins 1 & 2 closed
	Floppy drive disabled	JP6/jumper 7	pins 2 & 3 closed
»	Game Port (J3) enabled	JP6/jumper 9	pins 1 & 2 closed
	Game Port (J3) disabled	JP6/jumper 9	pins 2 & 3 closed

SERIAL PORT 1 (J5) INTERRUPT REQUEST
IRQ		JP7/jumper 1	JP7/jumper 2	JP7/jumper 3	JP/jumper 4
	2	closed	open	open	open
	3	open	open	open	closed
»	4	open	open	closed	open
	5	open	closed	open	open

SERIAL PORT 2 (J4) INTERRUPT REQUEST
IRQ		JP7/jumper 5	JP7/jumper 6	JP7/jumper 7	JP7/jumper 8
	2	closed	open	open	open
»	3	open	open	open	closed
	4	open	open	closed	open
	5	open	closed	open	open

PARALLEL PORT (J6) INTERRUPT REQUEST
IRQ		JP7/jumper 9	JP7/jumper 10
	5	open	closed
»	7	closed	open