Data bus:	16-bit ISA
Size:	Three-quarter length, full-height card
Hard drive supported:	Two RLL ST412 drives
Floppy drives supported:	None

CONNECTIONS
Function	Location
20-pin data cable connector - drive 1	J3
20-pin data cable connector - drive 0	J4
34-pin control cable connector - hard drive	J5
External LED connector	J6

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Latched hard disk mode enabled	W1/A	open
	Non-latched hard disk mode enabled	W1/A	closed
»	Four byte ECC enabled	W1/B	open
	Seven byte ECC enabled	W1/B	closed
»	Caching enabled	W1/C	open
	Caching disabled	W1/C	closed
»	BIOS enabled	W2	open
	BIOS disabled	W2	closed
»	Primary I/O address select	W3	open
	Alternate I/O address select	W3	closed
»	Factory configured - do not alter	W4	N/A