...because we can't all be on the bleeding edge...





DTC 2130 (900148-89B)

DATA TECHNOLOGY CORPORATION

DTC 2130 (900148-89B)

Data bus:

32-bit PCI

Size:

Full-length, full-height card

Hard drive supported:

Two IDE(AT) Interface drives

Floppy drives supported:

None

CONNECTIONS

Function

Location

10-pin connector - header cable connection

J1

40-pin connector - IDE interface

J2

Drive activity LED

LED

USER CONFIGURABLE SETTINGS

Function

Location

Setting

PCI INTA redirected to IRQ14

W1

closed

PCI INTA not able to be redirected to IRQ14

W1

open

MISCELLANEOUS TECHNICAL NOTE

Note:If your motherboard has an on-board IDE controller, it will have to be disabled. The DTC 2130S

needs access to IRQ14 in order to operate properly in the PCI slot. Some motherboards allow you redirect PCI INTA to IRQ14. If the PCI motherboard won’t allow you to redirect PCI interrrupts, then you will need to use the DTC 1415 Interrupt adapter. The DTC 1415 installs into any ISA B slot and has a header (W1) compatible with the DTC 2130S J1 header. The ISA A slot may still be used by an 8-bit card.