Card Type	Hard drive controller card
Hard Drives supported	Two IDE (AT) drives
Floppy drives supported	None
Data Bus	32-bit PCI
Card Size	Half-length, half-height card

CONNECTIONS
Function	Location	Function	Location
4-pin connector - drive active LED	J2	40-pin primary IDE(AT) connector	J4
40-pin secondary IDE(AT) connector	J3

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	J1	Unidentified

PRIMARY IDE INTERRUPT SELECTION
IRQ 14	Label	Position
INT A	W1	Pins 1 & 3 closed
INT B	W1	Pins 2 & 4 closed
INT C	W1	Pins 3 & 5 closed
INT D	W1	Pins 4 & 6 closed

SECONDARY IDE INTERRUPT SELECTION
IRQ 15	Label	Position
INT A	W2	Pins 1 & 3 closed
INT B	W2	Pins 2 & 4 closed
INT C	W2	Pins 3 & 5 closed
INT D	W2	Pins 4 & 6 closed