Card Type	Hard drive controller card
Hard Drives supported	Two IDE (AT) drives
Floppy drives supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Data Bus	32-bit VESA Local Bus
Card Size	Full-length, half-height card

CONNECTIONS
Function	Location	Function	Location
9-pin serial port 1 - external	CN1	34-pin cable connector - floppy drive	J5
25-pin parallel port - external	CN2	40-pin secondary IDE(AT) connector	J6
10-pin serial port 2 - internal	J2	40-pin primary IDE(AT) connector	J7
16-pin game port	J4	4-pin connector - drive active LED	J8

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Floppy drive interface enabled	W7	Pins 2 & 3 closed
	Floppy drive interface disabled	W7	Pins 1 & 2 closed
»	Game port enabled	W8	Closed
	Game port disabled	W8	Open
»	Parallel port is uni-directional	W17	Closed
	Parallel port is bi-directional	W17	Open

PARALLEL PORT ADDRESS SELECTION
Setting		W1	W2
»	LPT1 (378h)	Pins 2 & 3 closed	Pins 1 & 2 closed
	LPT2 (278h)	Pins 1 & 2 closed	Pins 2 & 3 closed
	LPT3 (3BCh)	Pins 2 & 3 closed	Pins 2 & 3 closed
	Disabled	Pins 1 & 2 closed	Pins 1 & 2 closed

SERIAL PORT 1 ADDRESS SELECTION
Setting		W5	W6
»	COM1 (3F8h)	Pins 1 & 2 closed	Pins 2 & 3 closed
	COM3 (3E8h)	Pins 2 & 3 closed	Pins 1 & 2 closed
	COM4 (2E8h)	Pins 2 & 3 closed	Pins 2 & 3 closed
	Disabled	Pins 1 & 2 closed	Pins 1 & 2 closed

SERIAL PORT 2 ADDRESS SELECTION
Setting		W3	W4
»	COM2 (2F8h)	Pins 1 & 2 closed	Pins 2 & 3 closed
	COM3 (3E8h)	Pins 2 & 3 closed	Pins 2 & 3 closed
	COM4 (2E8h)	Pins 2 & 3 closed	Pins 1 & 2 closed
	Disabled	Pins 1 & 2 closed	Pins 1 & 2 closed

SERIAL PORT 1 INTERRUPT SELECTION
IRQ		W14	W15	W16
	IRQ3	Open	Closed	Open
»	IRQ4	Open	Open	Closed
	IRQ5	Closed	Open	Open

SERIAL PORT 2 INTERRUPT SELECTION
IRQ		W11	W12	W13
»	IRQ3	Open	Open	Closed
	IRQ4	Open	Closed	Open
	IRQ5	Closed	Open	Open

PARALLEL PORT INTERRUPT SELECTION
IRQ		W9	W10
	IRQ5	Closed	Open
»	IRQ7	Open	Closed