Data bus:	16-bit, ISA
Size:	Half-length, half-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
34-pin control cable connector-floppy drive	J1
40-pin AT Interface (IDE) connector	J2
4-pin connector-Drive active LED	JP3

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Single speed floppy drives supported	JP1	open
	Dual speed floppy drives supported	JP1	closed
»	IRQ14 normal	JP4	pins 2 & 3 closed
	IRQ14 delayed until ACTIVE- signal is removed	JP4	pins 1 & 2 closed

MISCELLANEOUS TECHNICAL NOTES

Jumper JP2 is reserved - do not alter.