Data bus:	16-bit, ISA
Size:	Half-length, half-height card
Hard drive supported:	Two IDE (AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
4-pin connector - drive active LED	JP1
40-pin IDE (AT) Interface connector	JP2
34-pin control cable connector - floppy drive	JP3
Game port	JP8
10-pin serial port 2	JP9
10-pin serial port 1	JP10
25-pin parallel port	JP11

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive enabled	JP17	pins 1 & 2 closed
	Floppy drive disabled	JP17	pins 2 & 3 closed

IDE PORT
Setting		JP4	JP5
»	Enabled	closed	open
	Disabled	open	open

SERIAL PORTS 1 & 2 CONFIGURATION
Port 1		Port 2	JP6	JP7
»	COM1	COM2	pins 1 & 2 closed	pins 1 & 2 closed
	COM3	COM4	pins 1 & 2 closed	pins 2 & 3 closed
	COM1	COM4	pins 2 & 3 closed	pins 1 & 2 closed
	COM2	COM3	pins 2 & 3 closed	pins 2 & 3 closed

PARALLEL PORT CONFIGURATION
LPT		JP12	JP13
»	LPT1	pins 1 & 2 closed	pins 2 & 3 closed
	LPT2	pins 1 & 2 closed	pins 1 & 2 closed
	LPT3	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed