Data bus:	16-bit ISA
Size:	Three-quarter length, full-height card
Hard drive supported:	Up to seven SCSI devices
Floppy drives supported:	None

CONNECTIONS
Function	Location
SCSI connector - internal	J2
4-pin connector-drive active LED	J3
SCSI connector - external	J4

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Synchronous negotiation enabled	J5/1	closed
	Synchronous negotiation disabled	J5/1	open
»	BIOS enabled	J6/1	closed
	BIOS disabled	J6/1	open

DMA SELECTION
Channel	J5/8	J9/2	J9/6
5	closed	closed	closed
Note: No other settings were provided by manufacturer.

I/O PORT ADDRESS SELECTION
Address		J7/2	J7/3	J7/4
»	330h	closed	open	open
	130h	closed	open	closed
	134h	open	open	closed
	230h	closed	closed	open
	234h	open	closed	open
	334h	open	open	open

I/O PORT INTERRUPT SELECTION
IRQ		J5/9	J5/10	J5/11
»	IRQ11	open	closed	open
	IRQ9	open	open	open
	IRQ10	closed	open	open
	IRQ12	closed	closed	open
	IRQ14	open	open	closed
	IRQ15	closed	open	closed

I/O PORT INTERRUPT SELECTION (CONTINUED)
IRQ		J9/9	J9/10	J9/11	J9/12	J9/13	J9/14
»	IRQ11	open	open	closed	open	open	open
	IRQ9	closed	open	open	open	open	open
	IRQ10	open	closed	open	open	open	open
	IRQ12	open	open	open	closed	open	open
	IRQ14	open	open	open	open	closed	open
	IRQ15	open	open	open	open	open	closed

MISCELLANEOUS TECHNICAL NOTES

The only ISA SCSI Host Adapter address supported by Hewlett Packard is device address 7. Jumpers not specified in this document are factory configured.