...because we can't all be on the bleeding edge...





IDE3 - AT BUS/FLOPPY DISK CONTROLLER

KIMPSION INTERNATIONAL

IDE3 - AT BUS/FLOPPY DISK CONTROLLER

Data bus:

16-bit, ISA

Size:

Half-length, full-height card

Hard drive supported:

Two IDE (AT) Interface drives

Floppy drives supported:

Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS

Function

Location

40-pin AT Interface (IDE) connector

J1

34-pin control cable connector-floppy drive

J4

4-pin connector-Drive active LED

J6

USER CONFIGURABLE SETTINGS

Function

Location

Setting

Hard drive Interrupt is IRQ14

JP2

Pins 2 & 3 closed

 

Hard drive Interrupt is disabled

JP2

Pins 1 & 2 closed

1.2MB floppy drive support enabled

JP3

Pins 2 & 3 closed

 

360KB floppy drive support enabled

JP3

Pins 1 & 2 closed

Floppy drive enabled

JP7

Pins 2 & 3 closed

 

Floppy drive disabled

JP7

Pins 1 & 2 closed

Hard drive enabled

JP8

Pins 1 & 2 closed

 

Hard drive disabled

JP8

Pins 2 & 3 closed