Data bus:	32-bit, Vl bus
Size:	Three/quarter-length, full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE(AT) Interface connector	J1
34-pin control cable connector - floppy drive	J2
15-pin game port - internal	J3
10-pin serial port (COM2/3/4) - internal	J4
10-pin serial port (COM1/3/4) - external	J5
25-pin parallel port (LPT1/2/3) - external	J6
2-pin connector - Drive active LED	JP1

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Hard drive enabled	JP2	pins 1 & 2 closed
	Hard drive disabled	JP2	Pins 2 & 3 closed
»	Floppy drive enabled	JP3	pins 1 & 2 closed
	Floppy drive disabled	JP3	Pins 2 & 3 closed
»	Game Port (J3) enabled	JP11	closed
	Game Port (J3) disabled	JP11	open

SERIAL PORT CONFIGURATION
Port 1 (J5)		IRQ	JP4	JP5	JP12
»	COM1	IRQ4	Pins 1 & 2 closed	Pins 1 & 2 closed	pins 1 & 2 closed
	COM2	IRQ3	Pins 1 & 2 closed	Pins 2 & 3 closed	pins 2 & 4 closed
	COM3	IRQ4	Pins 2 & 3 closed	Pins 1 & 2 closed	pins 1 & 2 closed
	Disabled	N/A	Pins 2 & 3 closed	Pins 2 & 3 closed	N/A

SERIAL PORT CONFIGURATION
Port 2 (J4)		IRQ	JP6	JP7	JP12
»	COM2	IRQ3	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 3 & 4 closed
	COM1	IRQ4	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 1 & 3 closed
	COM4	IRQ3	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 3 & 4 closed
	Disabled	N/A	Pins 2 & 3 closed	Pins 2 & 3 closed	N/A

PARALLEL PORT SETTINGS
LPT		IRQ	JP8	JP9	JP10
»	1	IRQ7	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
	2	IRQ5	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
	3	N/A	Pins 1 & 2 closed	Pins 2 & 3 closed	N/A
	Disabled	N/A	Pins 2 & 3 closed	Pins 2 & 3 closed	N/A