...because we can't all be on the bleeding edge...





IFT-2000B (WITH OPTIONAL IFT-9031S/IFT9032S UPGRADE DAUGHTER BOARDS)

INFORTREND TECHNOLOGY, INC.

IFT-2000B (WITH OPTIONAL IFT-9031S/IFT9032S UPGRADE DAUGHTER BOARDS)

Data bus:

32-bit PCI

Size:

Three-quarter length, full-height card

Hard drive supported:

Up to fourteen Fast SCSI-2 devices

Up to twenty-eight Fast SCSI-2 devices with upgrades

Floppy drives supported:

None

CONNECTIONS

Function

Location

4-pin connector - drive active LED

JP2

50-pin SCSI connector - internal channel 1

JP3

50-pin SCSI connector - internal channel 0

JP4

Connector to upgrade board

JP8

50-pin SCSI connector - external channel 0

JP17

9-pin serial port - external

JP20

Connector to upgrade board

JP26

UPGRADE BOARD CONNECTIONS

Function

Location

50-pin SCSI connector - internal channel 2

BJP1

50-pin SCSI connector - internal channel 3 (IFT-9032S only)

BJP2

Connector to controller main board

BJP3

Connector to controller main board

BJP4

USER CONFIGURABLE SETTINGS

Function

Location

Setting

Factory configured - do not alter

JP1

pins 1 & 2 closed

Factory configured - do not alter

JP10

open

Factory configured - do not alter

JP11

open

Factory configured - do not alter

JP15

open

ONBOARD CPU SELECTION

CPU

JP9

JP18

486SX-25

pins 1 & 2 closed

pins 2 & 3 closed

486DX-25

pins 1 & 2 closed

pins 1 & 2, 3 & 4 closed

486SX-33

pins 2 & 3 closed

pins 2 & 3 closed

486DX-33

pins 2 & 3 closed

pins 1 & 2, 3 & 4 closed

DRAM CONFIGURATIONS

Size

Bank 0

2MB

(1) 512K x 36

4MB

(1) 1M x 36

8MB

(1) 2M x 36

16MB

(1) 4M x 36

32MB

(1) 8M x 36

Note: Minimum of 2 MBytes DRAM must be installed with/without parity function.

Minimum of 4 MBytes DRAM suggested for RAID-3 and RAID-5 configurations.