...because we can't all be on the bleeding edge...





IFT-3001 (WITH IFT-9021WS/WD/S UPGRADE BOARDS)

INFORTREND TECHNOLOGY, INC.

IFT-3001 (WITH IFT-9021WS/WD/S UPGRADE BOARDS)

Data bus:

None

Size:

3.5 in. form-factor half height

Hard drive supported:

Up to fourteen Fast SCSI-2 devices with upgrades

Floppy drives supported:

None

   

LOWER BOARD CONNECTIONS

Function

Location

50-pin SCSI connector channel 0 - external

J1

28-pin connector

CN1

28-pin connector

CN2

UPPER BOARD CONNECTIONS

Function

Location

50-pin SCSI connector - external channel 1

J2

9-pin serial port - external

J3

50-pin connector

CN3

50-pin connector

CN4

50-pin connector

CN5

50-pin connector

CN6

UPGRADE BOARD CONNECTIONS

Function

Location

68-pin SCSI connector - external channel 2

J4

9-pin fail-over port - external

J5

28-pin connector

CN7

28-pin connector

CN8

Note: 68-pin connector is on upgrade models FT-9021WS (Wide SCSI Single-Ended) or IFT=9021WD (Wide SCSI Differential). A 50-pin connector is on model IFT-9021S (8-bit Single-Ended) .

DRAM CONFIGURATIONS

Size

Bank 0

2MB

(1) 512KB x 36

4MB

(1) 1M x 36

8MB

(1) 2M x 36

16MB

(1) 4M x 36

32MB

(1) 8M x 36

Note: Minimum of 2 MB DRAM must be installed with parity function.

Minimum of 4 MB DRAM suggested for RAID-3 and RAID-5 configurations.