...because we can't all be on the bleeding edge...





INI-9090U

INITIO CORPORATION

INI-9090U

Card Type

Hard drive controller

Data Bus

32-bit PCI

Card Size

Half-length, full-height card

Hard Drives supported

Up to 7 Ultra SCSI devices

Floppy drives supported

None

CONNECTIONS

Function

Location

Function

Location

50-pin SCSI connector - internal

J1

4-pin connector - drive active LED

J3

50-pin SCSI connector - external

J2

 

 

USER CONFIGURABLE SETTINGS

Function

Label

Position

Host adapter is only one in system (see note below)

JP1

Open

 

Host adapter shares SCSI bus with adapter in another computer

JP1

Closed

PC BIOS select

JP2

Pins 1 & 2 closed

 

MAC BIOS select

JP2

Pins 2 & 3 closed

Note: Closing jumper JP1 sets active termination so it is always on. The setting is used when the adapter shares the SCSI bus with an adapter in another computer. If that computer can be turned off, closing the jumper will insure that active on-board termination is on all the time, regardless of whether power is applied or not.