...because we can't all be on the bleeding edge...





INI-9400U/UW

INITIO CORPORATION

INI-9400U/UW

Card Type

Hard drive controller

Data Bus

32-bit PCI

Card Size

Quarter-length, full-height card

Hard Drives supported

Up to 60 Ultra or Ultra Wide SCSI devices

Floppy drives supported

None

CONNECTIONS

Function

Location

Function

Location

50-pin SCSI connector channel 0 - internal

J1

50-pin SCSI connector channel 2 - internal

J7

4-pin connector - drive active LED

J2

Drive active LED

J8

68-pin SCSI connector - external

J3

68-pin SCSI connector channel 2 - internal

J9

50-pin SCSI connector channel 1 - internal

J4

50-pin SCSI connector channel 3 - internal

J10

Drive active LED

J5

Drive active LED

J11

68-pin SCSI connector channel 1 - internal

J6

68-pin SCSI connector channel 3 - internal

J12

TERMINATION CONFIGURATION FOR MULTIPLE INITIATORS

Note: Jumpers JP1, JP2, JP3, and JP4 set active termination on each specific SCSI bus so it is always on. The setting is used only when the adapter shares the SCSI bus with an adapter in another computer. If this computer can be turned off, closing the jumper will insure that active on-board termination is on all the time, regardless of whether power is applied or not.