Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE (AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE (AT) Interface connector	CN2
4-pin connector - drive active LED	CN3
HDD power connector	JP11

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Diagnostic mode enabled	E1	closed
	Diagnostic mode disabled	E1	open
»	IRQ buffer mode disabled	JP5	pins 1 & 2 closed
	IRQ buffer mode enabled	JP5	pins 2 & 3 closed
»	IRQ14 enabled	JP7	pins 1 & 2 closed
	IRQ15 enabled	JP7	pins 2 & 3 closed
»	Zero wait state enabled	JP8	open
	Zero wait state disabled	JP8	closed
»	Address is 1F0h	JP10	open
	Address is 170h	JP10	closed