...because we can't all be on the bleeding edge...





DAC960E

MYLEX CORPORATION

DAC960E

Data bus:

32-bit EISA

Size:

Three-quarter length, full-height card

Hard drive supported:

Up to twenty-one Fast SCSI-2 devices

Floppy drives supported:

None

CONNECTIONS

Function

Location

50-pin SCSI channel 2 connector - internal

J2

50-pin SCSI channel 1 connector - internal

J3

50-pin SCSI channel 0 connector - internal

J4

50-pin SCSI channel 0 connector - external

J6

2-pin connector - SCSI active LED

JP1/pins 1 & 2

2-pin connector - EISA active LED

JP1/pins 3 & 4

2-pin connector - write pending LED

JP1/pins 5 & 6

USER CONFIGURABLE SETTINGS

Function

Location

Setting

Factory configured - do not alter

JP2

N/A

Termination power enabled for SCSI channel 2

JP3

Closed

 

Termination power disabled for SCSI channel 2

JP3

Open

Termination power enabled for SCSI channel 1

JP4

Closed

 

Termination power disabled for SCSI channel 1

JP4

Open

Termination power enabled for SCSI channel 0

JP5

Closed

 

Termination power disabled for SCSI channel 0

JP5

Open

Note: Enable termination power when the controller is installed at one end of a channel and disable termination power when a channel is not at the end of SCSI cable. When both connectors J4 and J6 use channel 0, disable termination to that channel.

DRAM CONFIGURATION

Size

Bank 0

2MB

(1) 512 x 36

4MB

(1) 1M x 36

8MB

(1) 2M x 36

16MB

(1) 4M x 36

32MB

(1) 8M x 36