Data bus:	16-bit ISA
Size:	Three-quarter length, full-height card
Hard drive supported:	Two ESDI drives
Floppy drives supported:	None

CONNECTIONS
Function	Location
4-pin connector - drive active LED	J1
20-pin data cable connector	J2
20-pin data cable connector	J3
34-pin cable control connector - hard drive	J4

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Cache enabled	W1/A	open
	Cache disabled	W1/A	closed
»	4-byte ECC mode select	W1/B	open
	7-byte ECC mode select	W1/B	closed
»	Translation enabled	W1/C	open
	Translation disabled	W1/C	closed
»	Factory configured - do not alter	W1/D	open
»	Physical mode select	W1/E	open
	35 sector-per-track mode select	W1/E	closed
»	Alternate sector disabled	W1/F	open
	Alternate sector enabled	W1/F	closed
»	IRQ14 select	W7	pins 1 & 2 closed
	IRQ15 select	W7	pins 2 & 3 closed
»	Primary address is 1FXh	W12	open
	Secondary address is 17Xh	W12	closed