Card Type	Hard drive controller card
Hard Drives supported	Up to 15 SCSI devices
Floppy drives supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Data Bus	32-bit EISA
Card Size	Half-length, full-height card

CONNECTIONS
Function	Location	Function	Location
4-pin connector - drive active LED	J1	68-pin SCSI connector - internal	J4
34-pin cable connector - floppy drive	J2	68-pin SCSI connector - external	J5
50-pin SCSI connector - internal	J3

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Floppy drive interface enabled	W1	Closed
	Floppy drive interface disabled	W1	Open

TEMINATION SELECTION
Terminate function	Terminators installed
Low byte (bits 0-7)	Lower two pairs of terminators
High byte (bits 8-15)	Top four pairs of terminators
Terminate all signals	All terminators installed