PROMISE TECHNOLOGY, INC.
DC99, DC99M
|
|
Data bus: 16-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two AT Interface (IDE) drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin AT Interface (IDE) connector |
J1 |
|
34-pin control cable connector-floppy drive |
J2 |
|
4-pin connector-drive active LED |
JP1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Floppy drive enabled |
JP2 |
pins 1 & 2 closed |
|
Floppy drive disabled |
JP2 |
pins 1 & 2 open | |
| » |
Factory configured - do not alter |
JP2 |
pins 3 & 4 open |
|
CACHE CONFIGURATION | |
|
Size |
Cache |
|
512KB |
(2) 256K x 9 |
|
2MB |
(2) 1M x 9 |
|
8MB |
(2) 4M x 9 |
|
Note:When configuring the cache, both SIMM sockets must be occupied with identical SIMM's; i.e.: two 256KB, 1MB, or 4MB SIMM's. The modules may be 8 or 9-bits wide and must be 80nsec or faster. | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Warning: Do not reset or power-down the system while the drive active LED is lit! Data in cache RAM will be lost! |