PROMISE TECHNOLOGY, INC.
DC4030VL-2 (REV.2)
|
| |
|
Data bus: |
32-bit, VL-bus |
|
Size: |
Three/quarter-length, full-height card |
|
Hard drive supported: |
Four IDE (AT) interface drives |
|
Floppy drives supported: |
Four 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin IDE (AT) Interface connector - IDE 0, 1 |
J1 |
|
40-pin IDE (AT) Interface connector - IDE 2, 3 |
J2 |
|
34-pin control cable connector - floppy drive - Floppy 0, 1 |
J3 |
|
34-pin control cable connector - floppy drive - Floppy 2, 3 |
J4 |
|
4-pin connector - drive active LED |
JP1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Factory configured - do not alter |
JP2 |
pins 2 & 3 closed |
| » |
Floppy drive enabled |
JP3 |
pins 1 & 2 closed |
|
Floppy drive disabled |
JP3 |
pins 2 & 3 closed | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
At least one pair of SIMMs of equal memory size (256KB, 1MB or 4MB of 70ns or faster) must be installed in Bank 0 for the DC4030VL-2 to function. |