Data bus:	32-bit, VL-bus
Size:	Three/quarter-length, full-height card
Hard drive supported:	Up to seven SCSI devices, and two IDE (AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB or 1.44MB drives

CONNECTIONS
Function	Location
4-pin connector - drive active LED	CN1
50-pin SCSI connector - internal	CN2
26-pin parallel port connector	CN3
40-pin IDE (AT) interface connector - port 1	CN4
34-pin control cabled connector - floppy drive	CN5
Game port	CN6
10-pin serial port 2	CN7
10-pin serial port 1	CN8
50-pin SCSI connector - external	CN9

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Factory configured - do not alter	JP1	Pins 1 & 3 closed
»	Factory configured - do not alter	JP2	Pins 1 & 2, 3 & 4 closed
»	Factory configured - do not alter	JP3	Pins 1 & 2, 3 & 4 closed
»	Factory configured - do not alter	JP4	Pins 1 & 2 closed
»	CPU speed ³	JP5	Pins 1 & 2 closed
	CPU speed < 33MHz	JP5	Pins 2 & 3 closed
»	Floppy drive enabled	JP6/jumper A	Pins 1 & 2 closed
	Floppy drive disabled	JP6/jumper A	Pins 2 & 3 closed
»	Game port enabled	JP6/jumper B	Pins 1 & 2 closed
	Game port disabled	JP6/jumper B	Pins 2 & 3 closed

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Parallel port is output only	JP6/jumper C	Pins 2 & 3 closed
	Parallel port is input/output	JP6/jumper C	Pins 1 & 2 closed
»	IDE port disabled	JP8/jumper E	Pins 2 & 3 closed
	IDE port enabled	JP8/jumper E	Pins 1 & 2 closed

SCSI I/O ADDRESS - JP7
Address		Jumper A	Jumper B	Jumper C
»	330h	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
	130h	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
	134h	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
	230h	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
	234h	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
	334h	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed

BIOS ADDRESS - JP7
Address		Jumper D	Jumper E	Jumper F
»	C8000h	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
	CC000h	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
	D0000h	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
	D4000h	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
	D8000h	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
	DC000h	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 &3 closed

SERIAL PORT 1 CONFIGURATION - JP8
COM/Address		Jumper C	Jumper D
»	COM1/3F8h	Pins 2 & 3 closed	Pins 1 & 2 closed
	COM3/3E8h	Pins 1 & 2 closed	Pins 2 & 3 closed
	Disabled	Pins 2 & 3 closed	Pins 2 & 3 closed

SERIAL PORT 2 CONFIGURATION - JP8
COM/Address		Jumper A	Jumper B
»	COM2/2F8h	Pins 2 & 3 closed	Pins 1 & 2 closed
	COM4/2E8h	Pins 1 & 2 closed	Pins 2 & 3 closed
	Disabled	Pins 2 & 3 closed	Pins 2 & 3 closed

PARALLEL PORT CONFIGURATION - JP6
Address/IRQ		Jumper D	Jumper E	Jumper F
»	3BCh/IRQ7	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
	278h/IRQ5	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
	378h/IRQ7	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
	Disabled	All pins open	Pins 2 & 3 closed	Pins 2 & 3 closed