Data bus:	32-bit, VL-bus
Size:	Three/quarter-length, half-height card
Hard drive supported:	Two IDE (AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE (AT) interface connector - port 1	CN1
40-pin IDE (AT) interface connector - port 1	CN2
34-pin control cabled connector - floppy drive	CN3
Game port	CN4
9-pin serial port 1 - external	CN5
10-pin serial port 2 - internal	CN6
25-pin parallel port	CN7
2-pin connector - drive active LED	JPLED
Note:The location of JPLED is not specified in manufacturer’s documentation.

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Controls disk peripherals only	JP1	Open
	Controls disk and non-disk peripherals	JP1	Closed
»	Factory configured - do not alter	JP2	pins 2 & 3 closed
»	Chipset register address = 0BXh	JP4	pins 2 & 3 closed
	Chipset register address = 03Xh	JP4	pins 1 & 2 closed
»	Floppy drive enabled	JP12	pins 1 & 2 closed
	Floppy drive disabled	JP12	pins 2 & 3 closed
»	Game port enabled	JP17	pins 1 & 2 closed
	Game port disabled	JP17	pins 2 & 3 closed

IDE PORTS
Port 1		Port 2	JP3	JP5
»	Enabled	Enabled	pins 2 & 3 closed	closed
	Enabled	Disabled	pins 2 & 3 closed	open
	Disabled	Disabled	pins 1 & 2 closed	n/a

BIOS ADDRESS - JP6
Address		Jumper A	Jumper B	Jumper C	Jumper D
»	Disabled	closed	open	open	open
	C800h	open	closed	open	open
	D000h	open	open	closed	open
	D800h	open	open	open	closed

SERIAL PORT 1 CONFIGURATION
COM		JP10	JP11
»	COM1	pins 1 & 2 closed	pins 1 & 2 closed
	COM3	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORT 2 CONFIGURATION
COM		JP15	JP16
»	COM2	pins 1 & 2 closed	pins 1 & 2 closed
	COM4	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

PARALLEL PORT CONFIGURATION
LPT/Address		JP13	JP14
»	LPT1/378h	pins 1 & 2 closed	pins 1 & 2 closed
	LPT2/278h	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed