Data bus:	8-bit ISA
Size:	Half-length, full-height card
Hard drive supported:	Up to seven SCSI drives
Floppy drives supported:	NONE

CONNECTIONS
Function	Location
50-pin SCSI connector - internal	J1
25-pin SCSI connector - external	J2
4-pin connector - drive active LED	J3

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Memory mapped mode	S1/4	off
	PIO memory mode	S1/4	on
»	Zero waite state enabled	S1/5	on
	Zero waite state disabled	S1/5	off
»	SCSI termination enabled	S1/6	on
	SCSI termination disabled	S1/6	off
»	IRQ3 disabled	S1/7	off
	IRQ3 enabled	S1/7	on
»	IRQ5 disabled	S1/8	off
	IRQ5 enabled	S1/8	on
Note: IRQ3 & IRQ5 are in the off position and should only be turned on when enabled through the software.

BIOS ADDRESS SELECTION
BIOS Address	I/O Address	S1/1	S1/2	S1/3
C800h - CBFFh	310h - 31Fh	off	off	on
CC00h - CFFFh	300h - 30Fh	on	off	on
D000h - D3FFh	290h - 29Fh	off	on	on
D400h - D7FFh	280h - 29Fh	on	on	on
D800h - DBFFh	350h - 35Fh	off	off	off
DC00h - DFFFh	348h - 357h	on	off	off
E000h - E3FFh	340h - 34Fh	off	on	off
E400h - E7FFh	330h - 33Fh	on	on	off