Card Type	Hard drive controller
Maximum On Board Memory	N/A
Hard Drives Supported	Up to 7 SCSI-1 devices
Floppy Drives Supported	None
Data Bus	MCA
Card Size	Full length, half height

CONNECTIONS
Function	Location	Function	Location
50-pin SCSI connector - external	CN1	DC power connector	CN3
50-pin SCSI connector - internal	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	W4	Unidentified
Note:Number of pins of W4 is unidentified.

DIAGNOSTIC LED
Color	Status	Condition
Unidentified	On	Terminators missing
Unidentified	1 flash	EPROM failure
Unidentified	2 flashes	Local RAM failure
Unidentified	3 flashes	SCSI chip or interface failure
Unidentified	4 flashes	Internal data bus failure
Unidentified	5 flashes	Internal address bus failure
Unidentified	6 flashes	Bus master chip failure
Unidentified	Blinking	Fuse blown

MISCELLANEOUS TECHNICAL NOTES

Remove terminating resistors only when connecting external and internal devices at the same time.