Card Type	Hard drive controller card
Hard Drives supported	Up to 7 SCSI devices
Floppy drives supported	None
Data Bus	16-bit ISA
Card Size	Full-length, full-height card

CONNECTIONS
Function	Location	Function	Location
50-pin SCSI connector - internal	CN1	50-pin SCSI connector - external	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	JP1	Reserved
»	Factory configured - do not alter	JP2	Reserved

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Unidentified	On/blinking	SCSI channel active
LED1	Unidentified	Off	SCSI channel not active

MISCELLANEOUS TECHNICAL NOTES

RS1 & RS2 are terminating resisters. Only remove terminators in internal SCSI & external SCSI devices are attached.