Data bus:	16-bit ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE(AT) drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
34-pin cable connector - floppy drive	CN1
40-pin IDE(AT) connector	CN2
4-pin connector - drive active LED	J1

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	BIOS is Phoenix	J2	pins 2 & 3 closed
	BIOS is IBM	J2	pins 1 & 2 closed
»	Floppy drive interface enabled	J3	pins 2 & 3 closed
	Floppy drive interface disabled	J3	pins 1 & 2 closed
»	Floppy drive address is 3FXh	J4	pins 1 & 2 closed
	Floppy drive address is 3&Xh	j4	pins 2 & 3 closed
»	Hard drive interface enabled	J5	closed
	Hard drive interface disabled	J5	open