Data bus:	32-bit, VL-Bus
Size:	Three quarter-length, half-height card
Hard drive supported:	Two IDE (AT) interface drives
Floppy drives supported:	360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin primary IDE(AT) interface	CN1
40-pin secondary IDE(AT) interface	CN2
34-pin control cable connector - floppy drive	CN3
16-pin Game port	CN4
9-pin serial port 1 - external, 10-pin serial port 1 - internal	CN5
10-pin serial port 2 - internal	CN6
25-pin parallel port	CN7
2-pin drive active LED for primary IDE	JP1
2-pin drive active LED for secondary IDE	JP2

CPU CLOCK CONFIGURATION
CPU Clock	JP3	JP4
40/50 MHz	open	open
Below 20 MHz or Enhanced IDE support	open	closed
25/33 MHz	closed	open
Under 40 MHz or Non-ATA support	closed	closed

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Primary IDE interface enabled	JP5	pins 1 & 2 closed
	Primary IDE interface disabled	JP5	pins 2 & 3 closed
»	Secondary IDE interface enabled	JP6	pins 1 & 2 closed
	Secondary IDE interface disabled	JP6	pins 2 & 3 closed
»	Floppy drive interface enabled	JP9	pins 1 & 2 closed
	Floppy drive interface disabled	JP9	pins 2 & 3 closed
»	Parallel port is LPT2	JP14	pins 1 & 2 closed
	Parallel port is LPT3	JP14	pins 2 & 3 closed
»	Game port enabled	JP15	pins 1 & 2 closed
	Game port disabled	JP15	pins 2 & 3 closed
»	Factory configured - do not alter	JP16	N/A
»	Factory configured - do not alter	JP17	N/A
»	Factory configured - do not alter	JP18	N/A
»	Factory configured - do not alter	JP19	N/A
»	Factory configured - do not alter	JP20	N/A
»	Factory configured - do not alter	JP21	N/A

PARALLEL PORT MODE CONFIGURATION
MODE		JP7	JP8
»	Standard printer	pins 1 & 2 closed	pins 2 & 3 closed
	ECP / EPP	N/A	N/A
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORT 1 CONFIGURATION
COM		JP10	JP11
»	COM1	pins 1 & 2 closed	pins 1 & 2 closed
	COM3	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	N/A

SERIAL PORT 2 CONFIGURATION
COM		JP12	JP13
»	COM2	pins 1 & 2 closed	pins 1 & 2 closed
	COM4	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	N/A