Data Bus	16-bit ISA
Card Size	Half-length, full-height card
Hard Drives supported	Two IDE (AT/XT) drives
Floppy drives supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location	Function	Location
9-pin serial port 1 - external	CN1	40-pin IDE(AT/XT) connector	CN5
10-pin serial port 2 - internal	CN2	16-pin game port	CN6
25-pin parallel port - external	CN3	4-pin connector - drive active LED	J13
34-pin cable connector - floppy drive	CN4

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Floppy drive interface enabled	J1	Pins 1 & 2 closed
	Floppy drive interface disabled	J1	Pins 2 & 3 closed
»	Floppy drive I/O address is 3F1-3F7h	J2	Pins 1 & 2 closed
	Floppy drive I/O address is 371-377h	J2	Pins 2 & 3 closed
»	IDE(AT) interface enabled	J3	Pins 1 & 2 closed
	IDE(AT) interface disabled	J3	Pins 2 & 3 closed
»	IDE I/O address is 1F0-1F7h	J4	Pins 1 & 2 closed
	IDE I/O address is 170-177h	J4	Pins 2 & 3 closed
»	IDE I/O address is 320-323h	J5	Pins 1 & 2 closed
	IDE I/O address is 324-327h	J5	Pins 2 & 3 closed
»	IDE(AT) interface select	J6	Pins 1 & 2 closed
	IDE(XT) interface select	J6	Pins 2 & 3 closed
»	Serial port 1 enabled	J7	Pins 1 & 2 closed
	Serial port 1 disabled	J7	Pins 2 & 3 closed
»	Serial port 1 I/O address is 3F8-3FFh	J8	Pins 1 & 2 closed
	Serial port I/O address is 3E8-3EFh	J8	Pins 2 & 3 closed
»	Serial port 2 enabled	J9	Pins 1 & 2 closed
	Serial port 2 disabled	J9	Pins 2 & 3 closed
»	Serial port 2 I/O address is 2F8-2FFh	J10	Pins 1 & 2 closed
	Serial port 2 I/O address is 2E8-2EFh	J10	Pins 2 & 3 closed
»	Parallel port enabled	J11	Pins 1 & 2 closed
	Parallel port disabled	J11	Pins 2 & 3 closed