...because we can't all be on the bleeding edge...





S1410

XEBEC AMERICA

S1410

Data Bus

External

Card Size

5.25 in. form factor

Hard Drives supported

Two ST-506/412(MFM) drives

Floppy drives supported

None

CONNECTIONS

Function

Location

Function

Location

34-pin cable connector - hard drive

J1

Factory test connector - do not alter

J4

20-pin data cable connector - drive 1

J2

4-pin power connector

P1

20-pin data cable connector - drive 2

J3

50-pin SASI connector - external

P2

Note: P2 is the interface to the host adapter. See Miscellaneous Technical Note.

USER CONFIGURABLE SETTINGS

Function

Label

Position

Factory configured - do not alter

W1

Closed

Factory configured - do not alter

W2

Closed

Sector size is 256 bytes, 32 sectors/track

W3

Pins 1 & 2 closed

 

Sector size is 512 bytes, 17 sectors/track

W3

Pins 2 & 3 closed

SASI ID SELECTION

Setting

Connection

0

Pin O0 to pin S closed

 

1

Pin O1 to pin S closed

 

2

Pin O2 to pin S closed

 

3

Pin O3 to pin S closed

 

4

Pin O4 to pin S closed

 

5

Pin O5 to pin S closed

 

6

Pin O6 to pin S closed

 

7

Pin O7 to pin S closed

MISCELLANEOUS TECHNICAL NOTE

Note: The S1410 controller card is connected to the host adapter via the SASI bus (connector P2).

Multiple controller cards may be daisy chained on this cable, with each controller assigned a

unique SASI ID. When mutiple controllers are chained, install the terminator on the last card on

the chain.