Card Type	I/O controller
Chip Set	None
Maximum Onboard Memory	Unidentified
I/O Options	Terminal connector
Data Bus	16-bit ISA
Floppy drives supported	None

CONNECTIONS
Function	Label
37-pin connector	CN1
Note: CN1 is used to connect the IMP8 & the Terminal Array Panel together for Alloy’s NX386 operating system. The Terminal Array Panel contains eight terminal connectors (DB-9) & eight parallel/serial connectors (DB-25).

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	First IMP8 board installed	JP1	Closed
	Second IMP8 board installed	JP1	Open
Note: Only remove the jumper from JP1 on the second board installed in any system.

MISCELLANEOUS TECHNICAL NOTE

Note: The exact type & amount of memory is unidentified.