Card Type	Data Acquisition
Chip Set	Unidentified
Maximum Onboard Memory	Unidentified
I/O Options	Analog input, digital input
Data Bus	8-bit ISA
Card Size	Three-quarter length

CONNECTIONS
Function	Label	Function	Label
37-pin analog/digital signals connector	J1	A/D converter range selector	R102
Unipolar offset selector	R100	Cold junction range selector	R103
Bipolar offset selector	R101	Cold junction zero selector	R104

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	A/D data coding - two’s compliment	JP1	Pins 2 & 3 closed
	A/D data coding - straight binary	JP1	Pins 1 & 2 closed
»	A/D data coding - sign extend	JP2	Pins 1 & 2 closed
	A/D data coding - zero extend	JP2	Pins 2 & 3 closed
»	Hardware trigger internal	JP3	Pins 2 & 3 closed
	Hardware trigger external	JP3	Pins 1 & 2 closed
»	Scan disabled	W1	Open
	Scan enabled	W1	Closed

A/D RANGE SELECTION
Polarity	Voltage	JP4	JP5
Bipolar	+ 5V	Pins 1 & 2 closed	Pins 1 & 2 closed
Unipolar	0 - 10V	Pins 1 & 2 closed	Pins 2 & 3 closed
Bipolar	+ 10V	Pins 2 & 3 closed	Pins 1 & 2 closed

BASE I/O ADDRESS SELECTION
Setting		W9	W8	W7	W6	W5	W4	W3	W2
	000h	Open	Open	Open	Open	Open	Open	Open	Open
	010h	Open	Open	Open	Open	Open	Open	Open	Closed
	020h	Open	Open	Open	Open	Open	Open	Closed	Open
	030h	Open	Open	Open	Open	Open	Open	Closed	Closed
	040h	Open	Open	Open	Open	Open	Closed	Open	Open
»	110h	Open	Open	Open	Closed	Open	Closed	Open	Open
	FB0h	Closed	Closed	Closed	Closed	Closed	Open	Closed	Closed
	FC0h	Closed	Closed	Closed	Closed	Closed	Closed	Open	Open
	FD0h	Closed	Closed	Closed	Closed	Closed	Closed	Open	Closed
	FE0h	Closed	Closed	Closed	Closed	Closed	Closed	Closed	Open
	FF0h	Closed	Closed	Closed	Closed	Closed	Closed	Closed	Closed
Note: A total of 256 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. W9 is the Most Significant Bit and jumper W2 is the Least Significant Bit. The jumpers have the following decimal values: W9=2048, W8=1024, W7=512, W6=256, W5=128, W4=64, W3=32, W2=16. Turn off the switches and add the values of the switches to obtain the correct memory address. (Close=1, Open=0)

IRQ INTERRUPT SELECTION
IRQ		JP6	JP7	JP8
»	None	Open	Open	Open
	IRQ2	Open	Open	Pins 1 & 2 closed
	IRQ3	Open	Pins 1 & 2 closed	Open
	IRQ4	Pins 1 & 2 closed	Open	Open
	IRQ5	Open	Open	Pins 2 & 3 closed
	IRQ6	Open	Pins 2 & 3 closed	Open
	IRQ7	Pins 2 & 3 closed	Open	Open