...because we can't all be on the bleeding edge...





PCL-730

ADVANTECH CO., LTD

PCL-730

Card Type

Digital I/O card

Chip Set

Unidentified

Maximum Onboard Memory

Unidentified

I/O Options

Input channel connectors (2), output channel connectors (2), 37-pin input/output connector

Hard Drives supported

None

Floppy drives supported

None

Data Bus

8-bit ISA

Card Size

Half-length, half-height card

CONNECTIONS

Function

Label

Function

Label

20-pin isolated output connector

CN1

20-pin digital input connector

CN4

20-pin isolated input connector

CN2

Isolated output ground terminal

CN5

20-pin digital output connector

CN3

37-pin input/output connector

CN6

USER CONFIGURABLE SETTINGS

Function

Label

Position

Interrupt triggered on rising edge

JP2

Pins 1 & 3 closed

 

Interrupt triggered on falling edge

JP2

Pins 2 & 4 closed

VERSION SELECTION

Setting

JP4

JP5

A1

Pins 1 & 2, 4 & 5 closed

Pins 1 & 2, 4 & 5 closed

B2

Pins 2 & 3, 5 & 6 closed

Pins 2 & 3, 5 & 6 closed

Note: These jumpers control the pin assignments for CN1, CN2, and CN6.

INERRUPT SOURCE SELECTION

Channel

JP3/A

JP3/B

JP3/C

JP3/D

Isolated DI channel 0

Closed

Open

Open

Open

Isolated DI channel 1

Open

Closed

Open

Open

TTL DI channel 0

Open

Open

Closed

Open

TTL DI channel 1

Open

Open

Open

Closed

BASE I/O ADDRESS SELECTION

Setting

SW1/1

SW1/2

SW1/3

SW1/4

SW1/5

SW1/6

SW1/7

SW1/8

 

200h

Off

On

On

On

On

On

On

On

 

204h

Off

On

On

On

On

On

On

Off

 

208h

Off

On

On

On

On

On

Off

On

 

20Ch

Off

On

On

On

On

On

Off

Off

 

210h

Off

On

On

On

On

Off

On

On

300h

Off

Off

On

On

On

On

On

On

 

3E0h

Off

Off

Off

Off

Off

On

On

On

 

3E4h

Off

Off

Off

Off

Off

On

On

Off

 

3E8h

Off

Off

Off

Off

Off

On

Off

On

 

3ECh

Off

Off

Off

Off

Off

On

Off

Off

 

3FOh

Off

Off

Off

Off

Off

Off

On

On

Note:

A total of 125 valid base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/8 is the Least Significant Bit and switch SW1/1 is the Most Significant Bit. The switches have the following decimal values: SW1/1=512, SW1/2=256, SW1/3=128, SW1/4=64, SW1/5=32, SW1/6=16, SW1/7=8, SW1/8=4. Turn off the switches and add the values of the switches to obtain the correct memory address. (Off=1, On=0)

IRQ INTERRUPT SELECTION

IRQ

JP1/A

JP1/B

JP1/C

JP1/D

JP1/E

JP1/F

JP1/G

 

IRQ2

Closed

Open

Open

Open

Open

Open

Open

 

IRQ3

Open

Closed

Open

Open

Open

Open

Open

 

IRQ4

Open

Open

Closed

Open

Open

Open

Open

 

IRQ5

Open

Open

Open

Closed

Open

Open

Open

 

IRQ6

Open

Open

Open

Open

Closed

Open

Open

 

IRQ7

Open

Open

Open

Open

Open

Closed

Open

Disabled

Open

Open

Open

Open

Open

Open

Closed