Card Type	CR-ROM Interface card
Chip Set	Unidentified
Maximum Onboard Memory	Unidentified
I/O Options	Interface connector
Data Bus	16-bit ISA

CONNECTIONS
Function	Label
Interface connector	CN1

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	DMA sharing - disabled	J11	Pins 2 & 3 closed
	DMA sharing - enabled	J11	Pins 1 & 2 closed

PORT ADDRESS SELECTION
Setting		J10/A	J10/B	J10/C
»	220	Open	Open	Closed
	230	Open	Closed	Open
	240	Closed	Open	Open

BOARD ID SELECTION

Note: Closing J2/pins 5 & 6 forces the board base I/O address to 388h. When using the other jumper settings, the software scans for an available base I/O address. Refer to the manufacturer’s documentation for possible ID and base I/O settings.

INTERRUPT SELECTION
Setting		J13/A	J13/B	J13/C	J13/D
	IRQ2	Open	Open	Open	Closed
	IRQ3	Open	Open	Closed	Open
»	IRQ5	Open	Closed	Open	Open
	IRQ7	Closed	Open	Open	Open

MISCELLANEOUS TECHNICAL NOTES

Note: Termination Power and termination settings are unidentified.