Card Type	Digital multi-meter adapter
Chipset/Controller	Unidentified
I/O Options	Voltage, current, resistance and diode/continuity inputs
Maximum DRAM	N/A

CONNECTIONS
Purpose	Location	Purpose	Location
400mA range current test lead input	CN1	Ohmmeter test lead input	CN4
4A range current test lead input	CN2	5-amp fuse	F1
Common lead connector	CN3	5-amp fuse	F2

INTERRUPT SELECT
IRQ		J1
»	Disabled	All Pins open
	IRQ2	Pins 1 & 2 closed
	IRQ3	Pins 3 & 4 closed
	IRQ4	Pins 5 & 6 closed
	IRQ5	Pins 7 & 8 closed
	IRQ6	Pins 9 & 10 closed
	IRQ7	Pins 11 & 12 closed
	IRQ10	Pins 13 & 14 closed
	IRQ11	Pins 15 & 16 closed
	IRQ12	Pins 17 & 18 closed
	IRQ14	Pins 19 & 20 closed
	IRQ15	Pins 21 & 22 closed

I/O ADDRESS CONFIGURATION
Address		SW1	SW2
»	300h	1, 2, 3, 4, 5 & 6 on	1, 2, 3, 4, 5 & 6 on
	240h	1, 2, 3, 4, 5, 6 & 8 on	1, 3, 4, 5 & 6 on
	6FC4h	1 & 4 on	3, 4 & 5 on
Note: The address range for the DMM-100 is from 0 to FFFFh. The switches are a binary representation of the addresses. The switches have the following decimal values: SW1/1=8, SW1/2=4, SW1/3=2, SW1/4=1, SW1/5=8, SW1/6=4, SW1/7=2, SW1/8=1, SW2/1=8, SW2/2=4, SW2/3=2, SW2/4=1, SW2/5=8, SW2/6=4. The DMM-100 requires four consecutive address locations.