Device Type	Single board computer
Processor	80386SX
Processor Speed	40MHz
Chip Set	ALI M6117B
Video Chip Set	Chips and Technology
Maximum Onboard Memory	32MB
Maximum Video Memory	1MB
Cache	None
BIOS	AMI
Dimensions	190mm x 125mm
I/O Options	Floppy drive interface, IDE interface, parallel port, serial ports (2), PC/104 connectors (2)

CONNECTIONS
Purpose	Location	Purpose	Location
Power connector	CN1	LCD connector	CN11
Parallel port	CN2	Serial port	CN12
Reset switch	CN3	Serial port	CN14
Power LED & keylock	CN4	Serial port	CN15
Speaker	CN5	Serial port	CN16
IDE interface LED	CN6	Serial port	CN17
Floppy drive interface	CN7	VGA port	CN18
PC/104 connector	CN8	Auxiliary keyboard connector	CN19
PC/104 connector	CN9	PS/2 mouse/keyboard port	CN21
IDE interface	CN10

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	COM4 select RS-422, RS-485	JP1	Closed
	COM4 select RS-232	JP1	Open
»	PS/2 mouse IRQ12 enabled	JP8	Closed
	PS/2 mouse IRQ12 disabled	JP8	Open
»	Flash BIOS voltage select Vcc	JP15	Pins 1 & 2 closed
	Flash BIOS voltage select 12v	JP15	Pins 2 & 3 closed

SIMM CONFIGURATION
Size	Bank 0	Bank 1
1MB	(1) 256K x 36	None
2MB	(1) 256K x 36	(1) 256K x 36
4MB	(1) 1M x 36	None
8MB	(1) 1M x 36	(1) 1M x 36
16MB	(1) 4M x 36	None
32MB	(1) 4M x 36	(1) 4M x 36

VIDEO MEMORY CONFIGURATION

Note: The location of the video memory is unidentified.

SERIAL PORT 4 SELECTION
Setting		JP12
»	RX enabled	Pins 1 & 2 closed
	RX enabled if address is 2EFH	Pins 3 & 4 closed
	RX disabled	Pins 5 & 6 closed

SERIAL PORT 4 SELECTION
Setting		JP13
»	TX enabled	Pins 1 & 2 closed
	TX enabled if –RST = 0	Pins 3 & 4 closed
	TX enabled if address is 2EFH	Pins 5 & 6 closed
	TX disabled	Pins 7 & 8 closed

WATCHDOG TIMER SELECTION
Setting		JP9
»	System reset	Pins 1 & 2 closed
	Disabled	Open
	NMI	Pins 2 & 3 closed

WATCHDOG TIMER TIME OUT SELECTION
Time out		JP14
	1 second	Pins 5 & 6 closed
	2 seconds	Pins 5 & 6, 7 & 8 closed
»	10 seconds	Pins 3 & 4 closed
	20 seconds	Pins 3 & 4, 7 & 8 closed
	110 seconds	Pins 1 & 2 closed
	120 seconds	Pins 1 & 2, 7 & 8 closed

DISK ADDRESS SELECTION
Address		JP13
	Disabled	Open
	D0000	Pins 1 & 2 closed
	D8000	Pins 3 & 4 closed
»	E0000	Pins 5 & 6 closed
	E8000	Pins 7 & 8 closed