Processor	80386SX
Processor Speed	16MHz
Chip Set	Unidentified
Video Chip Set	None
Maximum Onboard Memory	4MB
Maximum Video Memory	None
Cache	None
BIOS	Unidentified
Dimensions	220mm x 220mm
I/O Options	External memory slots (2), floppy drive interface, SCSI interface, parallel port, serial ports (2)
NPU Options	80387

CONNECTIONS
Purpose	Location	Purpose	Location
Front panel connector	P1	Serial port	P8
Speaker	P2	Serial port	P9
Floppy drive interface	P4	SCSI interface	J19
External battery	P6	External memory slots	SL1 & SL2
Parallel port	P7

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	J1	Unidentified
»	Factory configured - do not alter	J2	Unidentified
»	Factory configured - do not alter	J3	Unidentified
»	Speaker volume select normal volume	W1	Open
	Speaker volume select low volume	W1	Closed
»	SCSI clock speed select 8MHz	W11	Pins 1 & 2 closed
	SCSI clock speed select 16MHz	W11	Pins 2 & 3 closed
»	Floppy drive pre-compensation mode 125ns	W13	Open
	Floppy drive pre-compensation mode 187ns	W13	Closed
»	Logic ground is connected to chassis ground	W20	Closed
	Logic ground is not connected to chassis ground	W20	Open
»	Parallel port IRQ select IRQ5	W21	Pins 1 & 2 closed
	Parallel port IRQ select IRQ7	W21	Pins 2 & 3 closed
	Normal mode enabled	SW1/1	Off
	Manufacturing mode enabled	SW1/1	On
	PC mode enabled	SW1/2	Off
	Terminal server mode enabled	SW1/2	On
	Video speed select slow	SW2/1	Off
	Video speed select fast	SW2/1	On
	Monitor type select color	SW2/2	On
	Monitor type select monochrome	SW2/2	Off

DRAM CONFIGURATION
Size	Bank 0	Bank 1	Bank 2	Bank 3
1MB	1MB	None	None	None
2MB	1MB	(1) 1M x 9	None	None
3MB	1MB	(1) 1M x 9	(1) 1M x 9	None
4MB	1MB	(1) 1M x 9	(1) 1M x 9	(1) 1M x 9
Note: Bank 0 is factory installed and is not configurable.

DRAM JUMPER CONFIGURATION
Size	W2	W3
1MB	Open	Open
2MB	Closed	Open
3MB	Open	Closed
4MB	Closed	Closed

FLOPPY DRIVE SELECTION
Setting		W4	W6	W7
»	Enabled	Closed	Closed	Closed
	Disabled	Open	Open	Open

FLOPPY DRIVE MOTOR SPEED SELECTION
Speed		W10	W12
»	Single	Pins 2 & 3 closed	Pins 2 & 3 closed
	Dual	Pins 1 & 2 closed	Pins 1 & 2 closed

SCSI INTERRUPT SELECTION
IRQ	W14	W15	W16
IRQ10	Open	Open	Closed
IRQ12	Open	Closed	Open
IRQ14	Closed	Open	Open