Processor	80486DX2
Processor Speed	66(internal)MHz
Chip Set	Unidentified
Video Chip Set	None
Maximum Onboard Memory	128MB (EDO supported)
Maximum Video Memory	None
Cache	256KB
BIOS	Unidentified
Dimensions	Unidentified
I/O Options	Unidentified
NPU Options	None

CONNECTIONS

Note: The location and types of I/O options are unidentified.

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	SW4/1	On
»	Soft switching mode enabled	SW4/2	On
	Soft switching mode disabled	SW4/2	Off
»	Keyboard broadcasting mode disabled	SW4/3	Off
	Keyboard broadcasting mode enabled	SW4/3	On
»	Mouse broadcasting mode disabled	SW4/4	Off
	Mouse broadcasting mode enabled	SW4/4	On
»	Scan mode enabled	SW4/5	On
	Scan mode disabled	SW4/5	Off
»	Tiering mode disabled	SW4/6	Off
	Tiering mode enabled	SW4/6	On
»	Factory configured - do not alter	SW4/7	Unidentified
»	Factory configured - do not alter	SW4/8	Unidentified

DRAM CONFIGURATION
Size	Bank 0	Bank 1	Bank 2	Bank 3
16MB	(1) 4M x 36	None	None	None
16MB	(1) 2M x 36	(1) 2M x 36	None	None
16MB	(1) 1M x 36	(1) 1M x 36	(1) 1M x 36	(1) 1M x 36
24MB	(1) 2M x 36	(1) 2M x 36	(1) 2M x 36	None
32MB	(1) 8M x 36	None	None	None
32MB	(1) 4M x 36	(1) 4M x 36	None	None
32MB	(1) 2M x 36	(1) 2M x 36	(1) 2M x 36	(1) 2M x 36
48MB	(1) 4M x 36	(1) 4M x 36	(1) 4M x 36	None
64MB	(1) 8M x 36	(1) 8M x 36	None	None
64MB	(1) 4M x 36	(1) 4M x 36	(1) 4M x 36	(1) 4M x 36
128MB	(1) 8M x 36	(1) 8M x 36	(1) 8M x 36	(1) 8M x 36

CACHE CONFIGURATION

Note: The chip size of the 256KB cache is unidentified.

MONITOR SELECTION NOTE

Note: The Proliant 1000R is capable of controlling up to 8 servers, each with their own monitor. To select a monitor type for a specific server, first consult either the 4 or 8 Port Monitor Control Selection Table to determine which switches are used for the configuration.. Then refer to the Server Monitor Selection table to determine the individual switch settings.

4 PORT MONITOR CONTROL SELECTION
Switch	Controlling switches	Server controlled
S1	S1/1 - 4	1
S1	S1/5 - 8	2
S2	S2/1 - 4	3
S2	S2/5 - 8	4

8 PORT MONITOR CONTROL SELECTION
Switch	Controlling switches	Server controlled
S1	S1/1 - 4	1
S1	S1/5 - 8	2
S2	S2/1 - 4	3
S2	S2/5 - 8	4
S3	S3/1 - 4	5
S3	S3/5 - 8	6
S4	S3/1 - 4	7
S4	S3/5 - 8	8

SERVER MONITOR SELECTION
Type	SW1/1 or SW1/5	SW1/2 or SW1/6	SW1/3 or SW1/7	SW1/4 or SW1/8
VGA	Off	Off	On	Off
Monochrome	Off	Off	On	Off
VGA	Off	On	Off	Off
SVGA	Off	On	Off	Off
SVGA- Compaq 430	On	On	Off	On
XVGA – IBM8512	Off	On	Off	Off
XVGA – IBM8513	Off	On	Off	Off
XVGA – IBM8514	On	On	Off	Off
XVGA – IBM8515	On	Off	Off	Off
Note: Each bank of switches must reflect the type of monitor configured on the server.

TECHNICAL NOTE

Note: Diagram not available.