Processor	Pentium Pro
Processor Speed	150/180/200MHz
Chip Set	Intel
Video Chip Set	None
Maximum Onboard Memory	128MB (EDO supported)
Maximum Video Memory	None
Cache	256/512KB (located on Pentium Pro CPU)
BIOS	Unidentified
Dimensions	305mm x 244mm
I/O Options	32-bit PCI slots (4), floppy drive interface, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), ATX power connector
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
ATX power connector	ATX	IDE interface 1	CN6
Parallel port	CN1	Floppy drive interface	CN7
Serial port 2	CN2	Front panel connector	J10E1
Serial port 1	CN3	Front panel connector	J10H1
PS/2 mouse port	CN4	32-bit PCI slots	PC1 – PC4
IDE interface 2	CN5

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	C1	Unidentified
»	Factory configured - do not alter	J67D1	Pins 4 & 6 closed
»	CMOS memory normal operation	J67D1	Pins 20 & 22 closed
	CMOS memory clear	J67D1	Pins 18 & 20 closed
»	Password enabled	J67D1	Pins 27 & 29 closed
	Password disabled	J67D1	Pins 25 & 27 closed
»	Setup access enabled	J67D1	Pins 28 & 30 closed
	Setup access disabled	J67D1	Pins 26 & 28 closed

DRAM CONFIGURATION (NON PARITY SIMMS)
Size	Bank 0	Bank 1
8MB	(2) 1M x 32	None
16MB	(2) 2M x 32	None
16MB	(2) 1M x 32	(2) 1M x 32
24MB	(2) 2M x 32	(2) 1M x 32
32MB	(2) 4M x 32	None
32MB	(2) 2M x 32	(2) 2M x 32
40MB	(2) 4M x 32	(2) 1M x 32
48MB	(2) 4M x 32	(2) 2M x 32
64MB	(2) 8M x 32	None
64MB	(2) 4M x 32	(2) 4M x 32
72MB	(2) 8M x 32	(2) 1M x 32
80MB	(2) 8M x 32	(2) 2M x 32
96MB	(2) 8M x 32	(2) 4M x 32
128MB	(2) 8M x 32	(2) 8M x 32

DRAM CONFIGURATION (PARITY SIMMS)
Size	Bank 0	Bank 1
32MB	(2) 4M x 36	None
64MB	(2) 8M x 36	None
64MB	(2) 4M x 36	(2) 4M x 36
128MB	(2) 8M x 36	(2) 8M x 36

CACHE CONFIGURATION

Note: 256KB/512KB cache is located on the Pentium Pro CPU.

CPU SPEED SELECTION
CPU speed	Clock speed	Multiplier	J6D1
150MHz	60MHz	2.5x	10 & 12, 11 & 13, 17 & 19
180MHz	60MHz	3x	9 & 11, 12 & 14, 17 & 19
200MHz	66MHz	3x	9 & 11, 12 & 14, 19 & 21
Note: Pins designated should be in the closed position.