...because we can't all be on the bleeding edge...





PROSIGNIA 200

COMPAQ COMPUTER CORPORATION

PROSIGNIA 200

Processor

Pentium

Processor Speed

166MHz

Chip Set

Unidentified

Video Chip Set

Unidentified

Maximum Onboard Memory

128MB (EDO supported)/256MB

Maximum Video Memory

Unidentified

Cache

512KB

BIOS

Unidentified

Dimensions

Unidentified

I/O Options

IDE interface, Ultra-Wide SCSI interface (optional), Fast-Wide SCSI interface (optional), parallel port, PS/2 mouse port, serial port, VGA port

NPU Options

None

34410

CONNECTIONS

Purpose

Location

External battery

E9/pins 9 - 12

Note: The location of the connectors is unidentified.

USER CONFIGURABLE SETTINGS

Function

Label

Position

Password enabled

E6

Pins 5 & 6 closed

 

Password disabled

E6

Pins 6 & 7 closed

Factory configured - do not alter

SW1/3

Unidentified

System boot from floppy controlled through configuration settings

SW2/1

Off

 

System boot from floppy drive regardless of configuration settings

SW2/1

On

Factory configured - do not alter

SW2/2

Off

Factory configured - do not alter

SW2/3

Off

CMOS memory normal operation

SW2/4

Off

 

CMOS memory clear

SW2/4

On

DRAM CONFIGURATION

Note: If EDO memory is installed, the maximum amount of on board memory is 128MB.The configuration for the 128MB & 256MB are unidentified.

CACHE CONFIGURATION

Note: The location of 512KB cache is unidentified.

CPU SPEED SELECTION

CPU speed

Clock speed

Multiplier

SW1/1

SW1/2

SW1/4

166MHz

66MHz

2.5x

On

Off

On

MISCELLANEOUS TECHNICAL NOTE

Note: Diagram not available.